dear friends,
thanks for your suggestions. I forgot to mention one thing. This is not a hardware related complaint. By repacing the EEPROM, its working. But is there any way to reset the EEPROM?
Type: Posts; User: toshiba
dear friends,
thanks for your suggestions. I forgot to mention one thing. This is not a hardware related complaint. By repacing the EEPROM, its working. But is there any way to reset the EEPROM?
Dear friends,
I'm facing "toner empty" indication in AR160 even after installing new cartridge. By changing the sensor chip in the cartridge doesn't solve the pbm. Simulation mode 14,16,25-02...
c-interrupt-#-interrupt-20-START
thanks buddy
hi friends,
what is the developer model and part number for konica 7135?
hi friends,
After toner exhausted, I replaced toner with new one and m/c shows "U2-40". Found OK when swapping the EEPROM. Is there any simulation to reset or cancel this error? Suggestions please.
Hi friends,
Is U2 error is related with wrong toner model? Simulation 16 doesn't reset this code. what is the right toner model or how to solve this?
thanks guys. I'll try all these and will revert back to you.
hi friends,
i got F-26-3, F-28-3, F-23-1. I replaced developer. m/c is getting ready but when i tried to copy, the paper jamming near drum, all developer attracted onto the drum & the m/c gives...
Hi friends,
What can be done to solve intermittent SC551 in MP7000? Thermistors replaced, Engine firmware updated. Error get reset in SP mode reset, but repeats after 2,3 days. Only 100k copies...
yes it is actuating and its not a physical pbm which I confirmed.
hi friends,
Anyone did face the pbm in MP1500, m/c doesn't take document from DF. DF position sensor working ok. But platen cover sensor doesn't work in Input check mode. sensor I replaced. what...
I have MP2500 basic machine, with Feature Expansion Kit type 2500 and one DDST unit. Expansion kit consists only memory module and no SD card. And I don't find any slot to install DDST unit. Pls...
hi friends,
In ricoh MP2500, to upgrade a basic copier into printer/scanner, what parts I need to have? (either GDI ot GW):(
Thanks a lot friend.
Hi friends,
Can anyone help me with the correct part number for the controller board of Ricoh MP2000 (printer & scanner inbuilt). The number available on the board is B8435127. But in the parts...
Hi friends,
In MPC300 with fax option, incoming fax is being forwaded to an email ID, which is in the address book and the forwading method is store and forward and not to print hard copy. In...
Hi friends,
I configured Ifax and tested sending fax to gmail and it was successful. But the receiving from mail to fax doesn't work. What can be the possibilities and which settings to be checked?:(
hi friends,
Can anyone get me the part number of the decal(english) which comes in the extreme left of the operational panel in the fax option of MP 2000.
This sticker has the buttons like on hook...
In rioch aficio 240W, I have some issues.
1.the continuous printing is set to 15m. but in continuous photocopying, the copy paper is not cut at the end and gives paper jam, even for 5m lenth paper....
in ricoh mp 4500, toner is not added automatically and hence the ID value increases gradually. when doing the force toner and with new ID sesnor initialisation, depth of copy increases. but again...
hai friends,
thanks for your suggestions and at last the pbm was due to the charge leak in drum unit and I replaced the PCUs and the issue got solved. Strange cause this is!
and it happens with all types of prints both in color and mono.
I swapped laser unit also and its not defective, I think this can be drum grounding pbm or bias pbm. I removed laser unit shutter also.
It happens in all colors and tomorrow I'm swapping the transfer belt unit.