It cause by main controller !!!
Type: Posts; User: godyng
It cause by main controller !!!
My client call a IRADV C3320 that had many white line at all color
I will pick 4 developer , HVT & 1 drum unit for this
Pls give me some suggestions for this case
I had a iR Adv 5250 display this error code and i already change a new ITB unit Before
Afther used 90000 this code is indicate again
I check this ITB is with the improvement kid
Now i adjust the...
I had make sure this is not toner type problem , because i already change other new toner !
I had a client use a iR adv 9075 pro this has display the error code E025-0100 , when restart machine this become normal . After print out about 1000 page the code display again.
Tomorrow i will...
Hi Teckat
This all the service mode I had already try such as
key in number at front cover before !!
Hi,
i have a Canon irc Advance 5235 with a problem for detect the monoarch envolope size , i had try to clean the size vr sensor , reposition the 3 point at the tray & service mode to auto adj the...
After replace the main con 1 yhe problem is solved !!!
Hi teckat
I had already prepare the software inside the usb flash drive before ,the problem is this m/c can not detect my usb stick ....
I put the usb stick to other m/c it can be detect , I also checked the setting for use usb stick in aditional function .
Thanks , but my problem is can not detect the usb for m/c used to upgrade system 。
Hi,
i have a Canon irc Advance 2030 with a problem for detect the usb for upgrade system any help will be appreciated ......
My problem is same as you , the k set on drive at the rear of the machine . There is a white gear with a pin is broken.
Is the video has been posted ???
At the last time change set on drive unit & main drive unit !!
Thank a lot for every helpful information . 3 day ago this machine become normal .
Today i replace the set on drive unit , drum drive unit , exchange deveoper motor , drum motor the problem is the same.
pg 16 at itb unit is even !
k drum , hopper , developer , itb unit ,2nd transfer roller are new.
I also try to exchange 2 laser before the resault is the same & the k developer roller surface is blance.
Does everyone can help me for a iRAC5051 this get a uneven copy & print at b/w , I try to change k drum , k developer , itb unit , k hopper & 2nd transfer roller .When change the k hopper the print...
First change all the charger wire
Second change the HVT PCB
This must be the color drum surface .
You can try to clean this or change this to solve the problem !!
replace the new laser unit can solve this problem
Thank you
how about IRA6055 , IR2525 &IRAC7055 Series_Symptoms & Solutions.pdf
Must be the HDD problem !