Hi Folks,
does anybody had a Problem with leacking Cyan-Toner on the Modells E57540 ?
I had a couple who were leacking cyan Toner shortly bevor the Cartridge were changed.
Maybe the...
Type: Posts; User: Roger67
Hi Folks,
does anybody had a Problem with leacking Cyan-Toner on the Modells E57540 ?
I had a couple who were leacking cyan Toner shortly bevor the Cartridge were changed.
Maybe the...
Main PCA
1 x 5MC63-67001
Hello Folks,
i have a E87650 who freezing in sometimes an then i get a 30.01.41 or an 30.01.57 code.
30.01.41 means: Scanner communications Error
30.01.57 means: Communication Issue...
Hi Folks,
I can't believe that !
621 views and nobody has an idea ?
omg
Cheers
Hi Folks,
so,back to work again.
In the Attachment i send you a copy of a Test-Sheet using a Paper with the Arrows.
You can clearly see,that the copy is smaller than the original,but only...
Hi Folks,
thanks for your answers.I now these Test-Sheets witth the arrows.
I work since 30 Years on Printers and Large Format Printers and i cant remember to
see that kind of primitive...
Hi Folks,
i have several M577 Maschines who makes a fine line at the end of the Page when you are
using the document feeder.
Means: Make a copy of an original with the DF and you will see at...
Hello,
i changed the ITB from a 2nd machine with the same result.
Then i turned the Yellow PCU and saw,that something is wrong with the charging or de-charging of the drum.
Hmmm,this is i...
its long Edge Feed
Hello,
the Stripe is on the short side,as you can see on the Picture.
I changed the Drum Unit.
It can be the Transfer Unit,because the Stripe is allways on the same Place on the Paper.
...
Hello,
i have a SPC 352 DN who makes sometines but allways on the 1. Page a Yellow Stripe like you can see in the Pic.
I changed the Yellow Unit and updated the FW.
The Stripe is allway at...
Hello,
thanks for your Reply,but i allready checked my Themostates, middle and rear, and there are O.K.
Cheers
Roger
Hi Folks,
i had a brand new IMC 4500 who comes with a SC547-02 right after Startup.
First i changed the Fusing Unit and Reset the Fusing Code.
The Problemes cames from the AC Controller...
Hi Folks,
does anybody knows this No Name Toner and has any Expierience with that ?
I need to check it on a MPC 3002 and also a MPC 3003.
I dont know where this product comes from.
45096
Hello,
Yes,first i liked to change the 2 Laser-Units to see,if the Problems changed from one to the other side,then when i saw how dirty
the laser on the right side was ( MGT / BLK ) i only...
Yes,i i have don this several times.
Hello,
no i dont have an Direct Contact to KM.
For execute a CALL i need to go to an other Dep in our Company.
Pinched Wiring is possible,but its even more difficult to find IT !
The...
Hi Folks,
i have THE aswer for this Problem.
Take a look at the picture you can clearly seen a Finger Print on the Glas of the Magenta - Laser !
This FingerPrint was the reasen of the...
Hi Folks,
after spending a couple of Hours i still have the C 5604.
I changed
PWB
Storage Board
BASEBOARD
Hi Folks,
i have a brand new IM C300 which comes with the following prints:
44953
Color Registration Adj. is not possible also the music - adj in the Tech Mode.
Anybody has ever seen...
Hello,
it seem that the problem comes from the Mass storage Board.
Its not possible to install it or even deactivate it.
I just ordered a new one.
Roger
Hello,
i have a brand new Bizhub 4050i who comes with a C - 5604 right after startup.
There is no discription in the Manual about that .
Any ideas ?
Thanks
Hi Folks,
it looks like that the following procedere fixt the problem:
[User Tools -> ([Machine Features]) -> [System settings] -> [Administrator Tools] -> [Enhanced Print Volume Use...
The Maschine is brand new and in our Company,where we test the Maschines with direct fax lines.
Roger
Hi,
sometimes i get also a SC 637-01 .
In the manual:
SC637-01 D Tracking Information Notification Error (Tracking application error)
Tracking information was lost.
• Tracking SDK...