No, removing the products from the device stops PaperCut. It didn’t remove the screen icon for me but the device is working perfectly fine & does not launch Papercut after restart.
Type: Posts; User: Clif
No, removing the products from the device stops PaperCut. It didn’t remove the screen icon for me but the device is working perfectly fine & does not launch Papercut after restart.
First Download and the Ricoh Remote Operation Client (ROC) app https://portal.celiveo.com/pluginfile.php/3003/mod_page/content/13/roc-ridp-1.6.1.zip
Follow the instructions below:
8.7:...
Thanks SandManMac. I was using the mpc2500 manual but could not find what i was looking for. i see it now. thanks for your help.
Hello
Does anyone have info on how to adjust the Rx ring count on an MPC2550 with fax option. Customer needs auto Rx ring count increased to 6 rings to allow remote access for security system.
...
Clean or replace transfer roller.
Yes. the laser was the problem. I left a cable unplugged.
Thanks CopyTech200X
I did remove the laser unit so I'll check the connectors.
Regards,
Clif
Make sure you use ip addresses & not hostnames.
Hello
I have a C320 in the field displaying error 006-380 after the copier was reassembled after a service. I removed the PCUs, transfer unit, laser lense, developer units & toner units, cleaned &...
Hi guys
I have replaced the iis & ess PWBs & now have a 124-315 error. I will try initializing the NV ram next. Any other suggestions?
Regards, Clif
Hello Jonner66
I cannot identify the parts you suggested above. Do you have the parts diagram you could post or perhaps part numbers or even a clearer description of the location of the PWBs?
...
Hello
I'm trying to track down a Xerox DocuCentre-II 2055 Service Manual. Can anyone help?
My email address is lanclif1@gmail.com
Regards,
Clif
Hello
I have a DocuCentre-II 2055 in the field with error 016-315 on the display. I have replaced the IOS PWB(scan PCB) but this has not cleared this error. I do not have the service manual so...
Thanks guys
it was 25 mode 3 set to 1 (tried this and it worked. don't know if it correct).
25 mode 3 set to 0 is for a 10 bin sorter.
25 mode 3 set to 0 is for a 20 bin sorter.
Just had to...
Hello
I need to disable a faulty finisher and lower paper drawers (drawers 3 & 4)
on an old Konica 4045. Hopefully there is a senior tech out there who remembers these machines :)
Thanks,
...
Have you installed ScanFileUtility, setup scan to pc destination & sender? Alternatively you can set up scan to email - less hassle for you.
Clif
Hello MrWho
I just checked and i can't find a manual for the 1212 but you can find part numbers here: Printer Toner Cartridges - Copier Toner Cartridges - Printer Parts & Copier Parts
Sorry for...
Try resetting the pm counter.
Clif
What is your email address? I'll forward the manual to you.
Clif
Will try formatting the HDD & bad sector check.
Thanks guys
Clif
Are you vacuuming the dev tank with the new TD sensor installed? If so that may be damaging the new sensors. Also take static precautions when installing the sensors to prevent static damage. Make...
Hello
I have an Aficio 2022 that hangs on startup and throws SC865. The service manual suggests a firmware upgrade. The current firmware is B0935931F Ver. 1.04. The copier has print, fax and scan...
Thanks gregoriojc
My email address is clif@lanclif.com or lanclif@excite.com
I have access to Konica service manuals & firmware if ever you need it.
Regards,
Clif
some part numbers can be found on Printer Toner Cartridges - Copier Toner Cartridges - Printer Parts & Copier Parts.
handy site
Hello
I have an Aficio 450 on site that generates what seems like source code(programming code) on the copy management report SP5990. I think it may have a glitch in it's firmware. The current...