hi mates,
how can be reset drum units transfer belt maintanence kits etc on ricoh spc 420
regards
Type: Posts; User: cypcopier
hi mates,
how can be reset drum units transfer belt maintanence kits etc on ricoh spc 420
regards
Hi ,
1 have a Konica Minolta 7272 and at display 'please wait for a while' and its not working. does anybody help me please .
regards
it is ok thanks a lot:cool:
Hi
how can reset the service sign at konica 1120
best regards
ı have a problem
(error code 121) (high voltage error) with oki mc 342dnw how can solve the problem or reset error code
regards
hi
you can find heat roller and press roller as well on market you have not to buy the fixing unit
hi,
ı have an oki451 dn and it gives error code 049 no printing,copying or scaning. how can ı solve this problem
regards
no 1 have two ip (ip011) still on it but ı want to change it with (ip 423) for network print.But 7022 needs upload new frimwire for ip423.
regards
i have a konica7022 it have ip 011 and i want to change to ip 423 and its needs to upload new firmware
can anybody help me to solve this problem
konica 7145,
is make some 34-5 grey copy after than its gone ok . when its stops for a while same error occurs
new drum, new developer, new tranfer corona
what can ı do
can ı use that fuse both transfer belt and fuser unit
hi
machine ıs fine with the single sided copies but when i try to copy duplex it get jam in the output tray (half of the paper). i have already change the sensors but no use.
looking forward...
hi,
i have 2 km bizhub 650 and thet are giving error paper empty reload paper expect by-pass tray(one of them gives this error 1-4 casette one of them 3-4 casette)
i chanege all boards and its...
hi,
chek the TORSİON SPRİNG at document feeder. if you have new one chane it or adjust it with pliers(
hi
thanks for all your support. i have checked the sensors by replacing the complete units with the new ones.. develop does rotate but when i try TCR adjustment then it gives error.
machine is at...
hi,
Im having problem with TCR Adjustment which gives me ERROR 6 (value 87) of Bizhub 500. I have tried many ways to fix it like changin developer,new developing unit, add toner manually. But it...
Hi,
I m looking for konica minolta bizhub 350 developing unit(new). If any one of you could help:)