Check the scanner lock at the back maybe it was pushed in.
Type: Posts; User: milan
Check the scanner lock at the back maybe it was pushed in.
Its look like you have a poor HV.
Yes you can clean, polygon mirror maybe dirty.
That is a system software problem, if you removed the controller out of the machine and run like ordinary computer, short the power switch pin to run, you will see on the RGB monitor that the program...
If your print controller fan is working that means that controller is working fine, the software is corrupted, we have this problem many times that we were installing the image file of the software....
replace the hard disk.
I had the same problem, most of the parts had been replaced but no success. I also put this problem in the forum but no concrete solution. I solved the problem, there was a wire cut between the Main...
Thanks for the update
If you want to increase the length of paper, you have to select in Simulation mode U273. With regards to PDF it needs a license for this (RSP file for PDF)
It seems LPH problem.
It means that the machine needs to service, maybe the maintenance counter is set to 500. To reset Enter maintenance mode and go to U251
It is a network virus called marioforever, this virus is hiding on the shared folder of your computer and sending print to a printer. try to have the latest anti virus. It happening to us and after...
try to check the front door switches, open this switch and clean the contact maybe it is coroded
try to check the main cable connector from machine to Srdf2, there is an open wire from this cable. We faced this problem several times.
there is a modification for this particular problem see attached file
please help me, I need a service and part manual for DP4530. is someone helpful to provide me my e-mail is
milan@gcgest.com
Thanks
it is Konica.
thank for your reply I do appreciate it.
Thanks Wang Chao I got it
please I need it also e-studio 230 parts and manual plus e-studio 351C
thanks milan@gcgest.com
I need parts catalog for Minolta 1015, please help
milan@gcgest.com
give your e-mail i will send it to you
we had this problem here but I don't know if you believe, we got a bad toner cartridge, we encounter it in the same lot number of the toner cartridge
I think you cannot do anything unless you send the DIMM to KYOCERA for reprogramming.
E061 - 0116, 01 means yellow XX16 of the error code
I need parts and service manual for minoltafax 2800 pls. help