Search:

Alright matey,

simply put, the fusing sleeves are different for the two speeds of machine. but the pressure roller, thermistors, blade etc are still the same.

something to do with more lamps in...

that's what we do for MP C3300, 5000's etc.

But the newer machines certainly don't work out cheaper, not in the long run. Because you're left with a bare carcass that no-one will buy off you and...

Have you tried flushing the memory with telnet?

I had a similar issue on a different machine.
I enabled telnet client on my computer then typed the letter 'o' 'space' 'ipofmachine'
It then...

Bumping this thread back up.


I hoped to find out if anyone had found a sure fire resolve for this issue?

I've got one in the office we're hoping to ship out, and the vibrating noise only...

Shameless bump.

We're a Ricoh dealer and got somebody asking us about three tier print costs. (not developments)

Is it even possible on Ricoh devices?

I agree with everything slimslob said.

I just wanted to add that you sometimes need to open and close the little door at the top of the duplex unit to clear the jam message. (see attachment)
I...

1. 64gb card won't be recognised in your device. The official card size is 2gb or less, any higher than this and it is likely that it won't work.

2. Any old card reader will do, I use the one...

just realised I had a similar fault not long back and it was due to the white T shape holder that holds the pickup and feed tyres in place.
When I took it off, there's a rim moulded to the white T...

Seconded...


PLUS - My-Ricoh has been working on and off for the past couple weeks and I can't download firmware anyway.. custom or official.

Yes, those feed tyres are basically the same.

Like steele said, you'll probably need to change the torque limiter.

Could also be the feed guide which has two little plastic bits that apply...

I think they put the majority of the cost for a rebuild into the hot roller because some people only replace that to get a machine going.

The cost of our hot roller (UK) AE010068 is £249.25
...

On top of wiping the address book in SP mode (5846-047)

Go into system settings > administrator tools > Page 2 and select 'delete all data in document server'.

Then go back to user tools, hold...

could be a few things.

On top of what Max said, I'd check the entrance guide on the finisher. Sometime they get bent and this can cause intermittent entrance jams.
Secondly, the bridge unit 'door...

I keep getting 304 on an MP4000, i cleaned the charge roller, contacts and bushings then developer and mag roller were replaced. cleaned ID sensor and reinitialised.

Still get the SC304 coming in...

I'm not familiar with these machines, but 'memory all clear' on any of them is a big no no.

Do you have the factory data sheet supplied with the machine? If so, you'll need to input all the...

What happened to it before this code came in?

it says unable to match serial number to controller.




Nipping out on a call, will check back later

Not the same machine, but on a 5500 we had a similar issue where the failed HDD was causing issues. We formatted it on a PC (i don't think format in SP mode is a full format) and it worked for a...

I've had multifeeds occur when the black gate has had one or both bumpers broken off (the gate that directs the paper upwards). The first sheet will get caught and then the second sheet gets fed into...

not sure if this is the solution to your problem sandman but is copier priority on?

If there's no priority set for startup i've noticed the 'ready' screen stays on much longer than normal.

by...

That's what I get for not checking MY-Ricoh. although I doubt I'd of found the facts sheet with it's horrible search tool.

Thanks very much, problem solved.

A3 double count is definitely on, I'm the main refurb engineer so I will check every single machine top to bottom before install.

As for rotations, I think we're onto a winner. The K PCU which...

Yes, we've had a couple machines fail early, but not call for new parts early.

I'm a bit skeptical about turning this SP mode off as the PM calls are usually a good thing. Do you have any idea why...

Hello everyone,

I've just got back from a call where an MP C3002 is flagging up on screen (user notice, not an SC code) that it needs the fusing rollers replacing.

Thing is, it's only done 185K...

UK checking in here.

We use Electroversal to repair our boards and they've been great. Got us out of several scrapes.

Whilst I'm here, anyone in the UK got a PCB board for an MP C3000 Fax unit?...

Our usual procedure for replacing an NV-ram in a reconditioned machine, would be to 'Download' the old Nv-ram data in SP5XXX to an SD card in the service slot.
We then replace the physical NV-ram...