usually not need to use drill or screwdriver - sometimes connector inserts tight into imagine unit, you need to press harder or use drop of oil.
on the "inner" side of toner tubes there is a flat...
Type: Posts; User: 21043
usually not need to use drill or screwdriver - sometimes connector inserts tight into imagine unit, you need to press harder or use drop of oil.
on the "inner" side of toner tubes there is a flat...
Once installed, chip will automatically reset it's counter every time you turn printer off or remove drum unit from printer, and does not require any attention from the user throughout the life of...
Fuser heat roller Xerox DC 240 242 250 252 WC7655 7665 - eBay (item 250615298440 end time May-14-10 08:58:19 PDT)
$205 with shipping.
No, i have not spare parts for print cartriges, but i waiting for testing of compatile photoreceptor drums - i hope it will be OK.
also chips in drums and toners can be disabled from service menu...
I sent a email to you with payments and shipment details.
Qualiy - just as original.
Hello!
Rollers are aviable, price is the same.
what is a BIOS leak?
connectors are ok.
developer goes out only from one side - where the gears.
by the way, where can i get spare gears?
thank you?
hello!
in CF5001 yellow developer goes out from dev unit
first i change developer, no effect. then developer go out from unit again and a gear on dev unit was damaged - i change whole unit - no...
Hello!
I have a Canon CLC 2620 and need a service manual - please help me to download it.
Thank you very much!
i can easy wipe it out
Hello!
i already get 2 new units and fix the old one.
i write to Fiery tech support - they actually don't know, will it work or not :-(
i can get it only from my fiery S300 (with Minolta CF5001).
i plan to buy C500 without RIp and buy 9850MFP FIERY RIP for it - so i cant get this page from 9850MFP FIERY RIP.
Hello!
can i plug HP LASERJET 9850MFP FIERY RIP (on photo) to Minolta Bizhub pro C500?
i have another CF5001 with it's own rip, and this rip looks like 9850MFP FIERY RIP, and as i know 9850MFP...
any models for 20-40 mA.
another 2 screws - and remove bar with 2 thermistors
http://photofile.com.ua/photo/obormot_21043/3727354/large/84477187.jpg
...
Hello!
Tools needed: Phillips screwdriver.
a fuser
http://photofile.com.ua/photo/obormot_21043/3727354/large/84477142.jpg
removing side covers - unscrew 2 screws on each side cover
$210 + $10 for worldwide shipping by airmail.
new improoved version of fuser roller for the same price!
http://photofile.com.ua/photo/obormot_21043/3730703/large/84637850.jpg
Hello!
yes, i have it now and will sell it in future :)
i am in Ukraine and ship this rollers worldwide by airmail.
Hello!
my english is not very good, ehat is "on-going source"?
i have heat rollers only for DC 250 and DC 2240/3535, Phaser 7700/7750/7760.
Hello!
i have a SC29-15 code on my Bizhub pro C500 whet i turn it on.
auto registration and auto gamma adjus tests from 36 menu are ok.
need help... :(
http://www.copytechnet.com/forums/konica-minolta/17993-bizhub-pro-c500-orange-problem.html
Hello!
as i know, for Konica 8050 there is a 2 type of fusers. old type fuser unit makes a traces on print from some rollers, and as a fixing of this problem Konica made a new type of fuser unit....
Hello!
thank you for answer, i already found a cause of defects - look my previous post.
hello!
no difference, printing from Win2000 and WinXP and from own menus of CF5001 (service mode).