You can download the scan to network app from the Lexmark Virtual Solutions Center..
Website = https://vsc.lexmark.com/c
You have to log in with a User name & Password.. The person that is...
Type: Posts; User: just a tech
You can download the scan to network app from the Lexmark Virtual Solutions Center..
Website = https://vsc.lexmark.com/c
You have to log in with a User name & Password.. The person that is...
We deal with the problem of humidity a lot here in the South.. Generally, when we have massive curling issues, its due to the moisture content within the paper stack.. Not sure in your case..
After...
hahaha..;):D
Hi mrfuser... Several questions have been asked by others and it's still not 100% clear as to what problem you are actually having..
When you say, "Yes that's it exactly"... To which are you...
I'm assuming that you are wanting to reset the System Admin log-in back to the default..
To do this :
-- Enter Diagnostics menu
-- Select "Diagnostic Routines"
-- Select "Other Routines"
--...
After checking things out as suggested, if all components driven by the Main Motor are found to be turning freely, try running the Main Drive motor from within Maintenance Mode U030 (selection A).....
Can right click on the print driver and select "Printing Preferences".. Select the "Advanced" tab within printing preferences, and click on the "Status Monitor" button.. Once in there, you can...
Haven't had this issue yet, but will keep an eye out for it..
Thanks..
JaT
May want to verify that the firmware you're using is actually for the FS-3140MFP...
Might possibly be firmware for the FS-3140MFP+ instead..
The "plus" uses different firmware than the regular...
Kyo fan pretty much nailed it on the head I think.. I typed up basically the same thing, but I always refresh the webpage before submitting a reply ,so I don't repost same stuff someone else just...
The menu settings are hidden within a special notification menu in the machine's web interface..
Open your web browser.. Type in "Machine's IP Address/svcmntrpt".. This will open the menu for the...
You're welcome Brother..
Hope you & family have a great weekend as well..
JaT..
I wasn't able to open the link for me to view the bulletin you're referring to.. But I'll try to help anyways.. ;)
With you already changing the imaging unit, and still getting blank images, I'd say...
Yes.. You definitely need to update your firmware to the most current version.. If you consider 2010 as being "current".. LOL.. But seriously though, you are like 15 versions behind the most recent...
The answer is "No".. Once the license key is registered with Kyocera and entered into the machine, the license key and machine serial # are then "married" to each other..
Some things to keep in...
First thing that comes to my mind, is a broken / loose wire on Transfer Belt Ass'y.. Used to have these models in several school systems, and teachers would always keep breaking the wires while...
The SCX-6345 machines have always proven to be problematic for us.. Well, most of them anyways.. Have had several over the past few years that have had freaky, intermittent, logic related issues...
Should be just the installation of the drum ass'y.. Don't believe I remember anything else being required..
Just a Tech
I have even a couple of the fuser version 6 go bad with belt damage (not totally ripped apart as with previous versions but about 1 inch wide damage on side of belt)
Have had no problems with...
If memory serves me correctly.. That would be because there is no easy way to get it out of there.. lol
Sucks I know.. But ya gonna have to strip it down to get to it.. Covers, Doc Feeder, etc.....
I am not sure if this is your problem or not.. But I have had, on occasion, where a sharp machine of this model and some close to it, would all of a sudden go "offline" and not print anymore (not...
I am a law abiding citizen and have had no issues at while owning any of my firearms.. So why should I be ridiculed or treated like an outlaw by my own government for owning or wanting to own...
The part# that Zackuth gave you is different from what I have in mine, but it is same part..
My resource lists :
Right Side Deck #1 -- 302FB09410 -- Film Feed C
Left Side Deck #2 -- 302FB09360 --...
The Jigs are supposed to be coming available for order from the National Parts Center sometime in early February.. They do not have a part# for them yet.. If you want one before they are available,...