Search:

Type: Posts; User: CopierTechofOmens

Page 1 of 12 1 2 3 4

Search: Search took 0.09 seconds.

  1. [Error Code] Re: copy data with valid signature in usb

    Did you unzip the file onto the USB?
  2. Replies
    4
    Views
    1,218

    Re: L4-08 sharp mxm850

    Is the Drum rotating?

    sim 6-1 and watch everything rotate
  3. Re: Wc5135 paper catch tray Finisher side

    Bypass Harness (Jumper)
    Part Number 600T02261


    Or If not available

    Make one with 3 Paper Clips.
    PJ151...
  4. Replies
    3
    Views
    1,192

    [Dead] Dead Bizhub Press C1070

    Trying to help out another tech. Any thoughts?

    Accessories
    PF- 707 - Paper Feeding Cabinet
    DF 626 - Reverse Automatic Document Feeder
    IC 602 - Image Controller
    UK 104 - Upgrade Kit
    FS 612 -...
  5. Replies
    1
    Views
    728

    Re: Sharp firmares

    Firmares only available from Sharp dealers
  6. Re: Xerox WC 7970 does not start after moving to another customer

    See if the bouncing knocked the heat sink loose on the SBC.
  7. Re: Xerox Workcentre 3345 7-130 jams & blank copies

    Registration Sensor issue
  8. Re: Wc5135 paper catch tray Finisher side

    2KLCSS? What do you need for it? Power supply?
  9. Replies
    3
    Views
    530

    Re: Xerox WC 7328 Software Keys

    The machine comes with scanning by default.

    Does it list Network Scanning on Config Page?

    If the Button is missing from Display you can add it under Services Tab in Admin settings
  10. Replies
    8
    Views
    1,400

    Re: Versant 280 Fiery

    Reseat the black HDMI-cables from the Fiery to the IOT. The cable for the yellow channel is used as a communication cable between Fiery and IOT, if this cable isn't connect properly, the Fiery will...
  11. Replies
    3
    Views
    530

    Re: Xerox WC 7328 Software Keys

    What options do you want?

    Will it print a configuration page?

    Network Scan, Scan to email?

    Probably, you just need to setup the network via the Admin settings, and configure via Web UI....
  12. Replies
    1
    Views
    1,668

    [Error Code] Re: Xerox 7855 error code 303.355

    Mine says: 303-355 Power On Self-Test failure detected during the NVM Integrity Test.

    Which only happens if multiple failures of HDD and SD card happen and the backups are lost
  13. Replies
    10
    Views
    5,836

    Re: Xerox WC 3655 Green Screen

    The boot loader status is: SD module initialization done. SD Card or Ram Fault
  14. Re: Xerx C75, 078-261 fault code for high capacity tray

    OHCF Shift tray fault. Bearing jumping of the slot where it is supposed to be held (PL 29.3 item #12). Possibly
  15. Re: Xerox DC252 fault dfe-000 / 127-337

    HDD Write issue

    Reload Software, Replace HDD, Replace ESS PWB
  16. [Jamming] Re: Xerox 4112 error 071-105 registration sensor on jam (tray 1)

    Check the Registration upper chute for paper cuts, catching the paper. Also the wiring harness to the reg sensor can break due to tension and opening 2B.
  17. Replies
    9
    Views
    1,368

    Re: MX-B450P emergency FW update

    Its from the 455. Just trying to help.
    We can always lay golden eggs. Sometimes they're just brown logs with gold spray paint
  18. Replies
    9
    Views
    1,368

    Re: MX-B450P emergency FW update

    Dip switches on the MFPC PWB to enable CN Update

    48494
  19. Replies
    9
    Views
    1,368

    Re: MX-B450P emergency FW update

    Which firmware did you load?

    0303y1A0?

    It was supposed to correct that issue
  20. Replies
    4
    Views
    1,819

    Re: xerox 700 045-360

    Reseat the interface cable between the DFE and the IOT

    Refer to the latest Software Release Notes to ensure that the latest software level located in the software matrix is loaded in the ...
  21. Replies
    4
    Views
    1,632

    Re: xerox 550 color

    062's are errors in the scanner area. Check all connections and reset the NVM, and or reload software if nothing else makes sense
  22. Replies
    8
    Views
    1,459

    Re: Workcentre 6400 altboot

    No extensions on the files?

    2GB or less flash drive?

    Did you plug the USB into the rear port?

    When you turn it on the verify that the LEDs come on the Control Panel for a short time?
  23. Replies
    11
    Views
    2,586

    Re: Sharp mxm 623

    There are 2 one-way clutches that weep oil and can slip on each feed assy. Also check to see if the trays are lifting to the correct position.
  24. Replies
    8
    Views
    2,258

    Re: MX-354 keeps getting F2-40 errors

    Is the machine pre 9/14? The main drive and toner supply clutch have been updated. If you've checked all the mechanical then its electrical. I.E. Wiring harness, PCU
  25. Replies
    4
    Views
    2,521

    Re: mx-m654 won't 'add staples'

    There’s a little arm on the bottom of staple cartridge that actuates the sensor. Could be missing on the cartridge
Results 1 to 25 of 277
Page 1 of 12 1 2 3 4