Search:

I just wanted to thank all for the nuggets...I asked my fellow techs and no one was experiencing this and Ricoh tech support really had no answer but to order a new PCDU...glad to hear it's out there...

Hi all I have a brand new IM 4000 installed Jan 2022 with 82023 clicks on the PCDU, target yield is 160K. I'm getting devo build up on front side of dev unit(mainly) and rear end; then spills over...

In a pinch you can remove the gear and scar the shaft so the bearing has something to grab on too...i used a box cutter blade. BE CAREFUL NOT TO CUT YOURSELF AND OF COURSE THIS IS A TEMPORARY FIX.

Not that my blind self can see. I checked for any debris of such but no die...the only thing i can see that the cartridge carriage itself looks a little gunky with ink. I really dont know how much of...

Believe me I plead my case to the sales reps but these smart ones decided to put them on a maintenance contract so i was told I better make an effort to fix them...

Hello guys,

Not too familiar with the HP but I do come across them from time to time. So this little throw away seems to be kicking my tail. Please see attached pdf examples. I already went ahead...

UPDATE 6/3/16

So I ended up replacing the BICU...worked for a couple weeks annnnnnnd we are back to the same error. I will be trying to update firmware again and see if that fixes it. Tech support...

just ran into this problem on a 503.Internal prints/copies come out fine but there was a grainy/greyish even background.check the dev bias, sim 8-1 to adjust. hope this helps.

FIXED-UPDATE

So it ended up being the development bias was way off. Used simulation 8-1 to fine tune it. Thanks guys!!

Hey all,
So i thought i was done seeing this issue but apparently it has reared its ugly head like the poltergeist movie:eek:. I replaced the entire laser unit...I'm thinking firmware or BICU next....

Thanks for the suggestions guys...I'll reply with fix once I figure it out. This equipment is in a prison and well I certainly don't want to go back there any time soon. Customer hasn't noticed but I...

Ok I'm chasing my tail here...the background is very slight when you do internal prints and of course it gets darker when making a copy. Replaced dev unit,dev,drum and transfer assembly...I may...

Hi Flash, thanks for the reply. It was actually the drum...went ahead and replaced it and worked like a charm. Thanks!

Hi all,
ive gone through 2 toners already and it keeps saying to reinstall toner or its set incorrectly....HELP.

Fault codes: 09-600 and 07-500

Thanks ahead of time.

Hey all,
I keep getting intermittent service calls regarding the printer locking everything up...i disconnect the network cable power it back up and it works fine until i plug the network cable back...

Hey guys so I know this error has to do with the discharge lamp trouble...so I was at customers site around 2pm on a Friday before a 3 day holiday weekend and needless to say I was rushed the hell...

BASTARDS! I thought for some reason the manual was downloaded incorrectly...even went as far as downloading it again. I hate those 3D manuals... @slimslob Thanks for the input.

Hey all! Any advise appreciated on this issue.

SC226-Laser synchronizing detection error: start position [C]: LD0
So far all I really did was reseat all connectors from laser assembly including...

UPDATE:
@faxman28 correct you were sir...i didn't even think of scanning to HDD. Its definently a DRIVVE app issue, after scanning to HDD we print it out and it printed "clean". No pixelations or...

Hey guys need advise. I have a 6240 that scans originals blurry/pixelated. I made copies from feeder and all looks good, I also cleaned optics and no change. Machine has been there about 1 year. Its...

Hi all,
I have a C3545 ADF pick up roller assembly that stays in the down position, it still works but you manually have to lift them and set your originals. New to the Xerox line and no support;...

I have two 3110's in the same account with these error codes...that seems weird to me. HDD or SD card? Can anyone PLEASE advise?? Side note:they both have DSK installed, i heard i cannot do firmware...

Hey all,
I need to replace the dev unit and developer...not a Xerox pro nor do I have any edocs. Is this just a plug and play or is there anything I need to do without edocs?? Initializations??
...

Hey C-zar,
to help you get started you will need to remove the bypass assembly. To do that, you will have to remove the front cover and I believe one of the side covers. Once the bypass assembly is...

FIXED: hey guys, so it seems like the main charge unit was the problem. Replaced it and badooosh! Happy Customer! Seems like it did bind up. Thanks all!