because Toshiba have moved to the back of the line lets face it Ricoh is the best machine out there and Toshiba is lacking and have for a long time I guess they can make computer but not imagers...
Type: Posts; User: stockman123
because Toshiba have moved to the back of the line lets face it Ricoh is the best machine out there and Toshiba is lacking and have for a long time I guess they can make computer but not imagers...
Bad hdd for warm up I think not maybe power up but not warm up
did you try vacuuming the hopper assy
4 to 5 calls a day depening on the job if you have to pm a machine maybe 3 per day depending on the unit
jusk try changing the trans belt clean and replace the trans belt blade. Should take care f the problem
have you ever tried to change the trans bely blade this takes take of most ot those isses
Another junk by Toshiba that might even be a sharp knock off
that goes for the whole 355 series
don't get yourself into problems they are junk
the newest version is is V.435
on the control panel in the admin screen
brillo pad that seems a little much I just use a cotton rag and alcohol it works fine
Ive worked on your old 355/455 you must have upgraded what's the matter next door cant help you Dave is so gullible with some people that business has gone down hill If you want the service hand book...
it should have came with the codes the manual I have has them is langonets inc. autobody
well whats the fatal error
really did you look in back of the cassette for paper start simple
replace your thermistors
Check the yellow corona to see if it let loose the block in the rear sometimes breaks over time which causes this problem
08 power on 9891 set to 0 this will shut off counter
did you clean the sensors that would be my first step dust will screw things up for detection and if you've tried other sizes and it worked fine try swapping out sensors they should be the same
you need to disassemble there is a motor that turns that could be the issue because toner builds on the gear causing it to bind but disassemble is required to properly repair you must see what gear...
I agree this is bulls.... talk about boring I go to Ricoh they are a better machine in my opinion anyways. I* loved Toshiba until I was trained on ricoh they run so much better and talk about...
what do you need
this is the way to do it otherwise you get call for ridiculous tasks that don't need to be done so do this procedure
yes for most model machines