Hi Dears:
we face a problem with imagepress c800 that displays a jam when it takes an order to print the jam code is 0A0C
the action was taken as mentioned that ps123 had cleaned with no response ...
Type: Posts; User: khattab.al.masry
Hi Dears:
we face a problem with imagepress c800 that displays a jam when it takes an order to print the jam code is 0A0C
the action was taken as mentioned that ps123 had cleaned with no response ...
it related to licensing that you had entered
I think you need to license to work on F200
Does it related to Main control firmware version
because we search about MIXM-PFP we did not found it
Do you hear any noise?
model please!
Yes color 6100
Sent from my CPH2239 using Tapatalk
We run p.m as usual and after completed we run gamma adj.
C-2807 appear we checked process connection and IDC Shutter sensor
with on result.
Sent from my CPH2239 using Tapatalk
[Symptom]Power supply error
[Cause]The Environment Heater Driver PCB did not detect 5 V.
Or overcurrent was detected.
[Remedy][Related parts] R1.00
Possible causes of the error are as follow:...
Jam codes 0118 and 0119 occur when duplexing 215.9mm x 279.4m (letter paper).
Jam codes 0213 and 0218 occur when duplexing 11x17 or 279.4mm x 431.8mm (larger paper).
0118: Duplex Sensor 3 (PS26)...
You can download the operating system what you want from the following link:
https://www.efi.com/support-and-downloads/download-center/?type=&oem=&sid=&model=&os
but you should create account...
https://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/85781-mpc-7501-fuser-connector-same-mpc7500.html?85781=#post402225
I hope the following my intervention to be useful and I have attached the following image to help you where you can find the trouble reset switch.
How to reset
Press the Trouble Reset Switch on...
[emoji529][emoji529][emoji529][emoji529][emoji529]
In your ass mother fucker
Sent from my CPH2015 using Tapatalk
Pla pla pla mr: reputation,,[emoji107][emoji107][emoji107][emoji107][emoji107][emoji107]
All you do just blame blame
not give any help
I do not know why person like you is as admin with this site...
We face the same problem with imagepress C1 plus that jobs canceled by engine.
and found pins as in attached photo warm out
Sent from my CPH2015 using Tapatalk...
you said that tried with 2 different servers the power supply unit had expired
who told you?
Mr:
here what you needed
This means you need to installation manual right.
Dear:
We faced this problem many time the actions was taken as follow:
1-have backup of dc-con readings
2-make a clear for dc-con
3-in service mode make clear to deck-recev
4-then make restore...
Have you checked this marked box.https://uploads.tapatalk-cdn.com/20201126/a5c729c20d3677d7b8a90fbcf085e578.jpg
Sent from my CPH2015 using Tapatalk
Follow the following link:
https://www.efi.com/support-and-downloads/download-center/?type=&oem=&sid=&model=&os=
This procedure can used to accuriopress 6136?
We face the same problem with cyan color with code e029-5021
The cause was worn out of gears in dev. stirring motor we replaced the motor and machine worked in fine.
Sent from my CPH2015 using...
we face the same problem with konica minolta 6136 the sequences had taken:
1-enter service mode (at this point you are prompted to input password disregard and preform the next step)\
2-push...