new partition fat32 or ntfs? I'm wiping in windows disk mgmt
Type: Posts; User: texascopy1
new partition fat32 or ntfs? I'm wiping in windows disk mgmt
Well gang, I'm about to put this baby to bed but have a question on wiping the ssd. Got an adapter and connected to computer. Computer shows 3 different drives F,G & H, I imagine the ssd has 3...
Did the boot rom update, partition clear procedure and tried to load firmware, still no go on 2 different ssd's. I think I may be using the wrong firmware. I downloaded fw_aa2j0y0-f000-g00-n4.exe &...
in km fw on thing I'm finding is G00-n5 & n4 -where should I be looking. Does any one have the pre 2019 fw for c250/c300/c360i. It's a 2021 mfr but maybe it doesn't like the newer fw
Completed rom update on c360i, no change. System doesn't recognize 64 ssd loaded and 96 loaded comed back incorrect memory, check memory. ??? going to try m2 adapter to format. side note - on the...
Morning guy's. Just received a used c360i into inventory - freezing @ 25%. It came in with a 64 ssd. Immediate ng on fw update w/ usb, all options pass. Tried another 64 no luck. Tried a 96 from...
This one is officially put to bed. Did the software install, pretty painless. loaded cw5 and all is well. The underlying problem was a software glitch on e: drive partition. I thought I might have...
I agree! I'm going to replace the hd in the morning, I think it might be bad. Also found dvd unit isn't reading good, that's why I couldn't run the diagnostics. Just waiting to see what I run into...
Yeah I thought it should be pretty straight forward. Loaded the disk shows a penguin or something with a pdf ext. click on that and it just hangs up on acrobat for a while. when I cold boot with it...
I started to do the re-install but decided I'd try the diagnostics disk first. I put it in and powered the unit off/on but the display just stayed black except 1 line of text accross the top. is...
got it, thanks! I'm going to try a few other things before I do reload, will let you know what I find.
version 2.1, thanks
Thanks for hangin' in there with me. I thought about the reload but I only have sys software disk not user software disk, it's oce cs665 version 2.1. Windows restore was turned off and turning on...
Any ideas??? Any one??? any input would be appreciated
Good morning, what I'm really trying to focus on is getting the fiery to go to idle and come out of "starting up". I can power on the firey, log on with Fiery.1, log on to cws, see the copier and...
yes i do have faci. I do get windows desk top also cws5 powers on and allows me to see 172.0.0.1 and c6501, clicking on either it ask for password then comes back unable to connect. I can go into...
I'm not sure how. I thought it was as simple as typing the ip address into the address bar but it keeps saying refused connection. And please remember that even though I can get into cws and just...
Hello, I have a pro80 controller 65-55 v2.1 connected to a c6501 that is just plain acting strange. It powers on with amber blinking light on fiery right above fiery lcd. It has faci and cws comes...
ok, sorry about that. starting new one now
Hello, I've been following this thread with a similar problem on a pro80 controller 65-55 v2.1 that is just plain acting strange. It powers on with amber blinking light, has faci and cws comes up...
make sure you have the cables coming out of the machine into the controller/pw sup unit on the back plugged in to the proper connectors. if they are reversed it will produce this same problem. k & c...
Did the cassette swap, size switch swap dc con, all mentioned in the thread. replaced cassette feed pcb - problem solved. For those having this problem it is easier to go for the cassette pcb right...
Yep, size set to 1. Actually took switches from another working unit, still same problem. about to switch cassette feed board but was hoping it was something simple before I tear into that.
Yes, tray 1 is the only one having trouble. It feeds fine, recognizes paper level and prints to the page just won't recognize anything but a4 at letter size. Messed around with cassette levers and...
Is there anyone else out there experiencing this same problem? Replaced dc cntrlr still no resolution.