Search:

Type: Posts; User: Quercus

Search: Search took 0.02 seconds.

  1. Replies
    0
    Views
    927

    XEROX 7142TEX printhead question

    Can anyone give me an info which printhead goes to XEROX 7142TEX ?
    And perhaps where is it possible to acquire one at a reasonable price.

    Its a large format printer, the TEX model is intended...
  2. Re: Cannon iMAGEprograf IFP5000 - does it worth to make it functional again ?

    At this moment already bothh: "Check L printhead" and "Check R printhead" are displayed :( ... and any attempt to run a cleaning cycle drains approx 20% of most inks ...



    I laready did this

    ...
  3. Replies
    0
    Views
    418

    CANON imagePROGRAF IPF5000 for parts

    My IPF5000 has both heads failing, so Its not quite effective for me to try to make it functional again.

    After several weeks unused Ive got a message when Ive turned on the printer and ran a head...
  4. It seems that most economical will be part out...

    It seems that most economical will be part out the printer to cut the loss since its almost 100% that both heads are faulty.

    Give me a shout if anybody wants any parts of the IPF5000.

    Its...
  5. Re: Cannon iMAGEprograf IFP5000 - does it worth to make it functional again ?

    Done ... hovewer I had to inser a new Yellow and PGY cartridge ... otherwise it refused to refill the tubes :(



    The nozzle test done in the service mode has the same missing pattern as the...
  6. I have cleaned the heads and most of the nozzles...

    I have cleaned the heads and most of the nozzles work just fine except two colors (upper right and lower right of the nozzle check pattern)

    http://img.tapatalk.com/d/14/03/05/uru9eveq.jpg

    Whad...
  7. Re: Cannon iMAGEprograf IFP5000 - does it worth to make it functional again ?

    I'm dot at the printer at them moment, and when I'm connected to the printer remotely I see no detailed info about the heads.
    Hovewer based on the logs, the L head was changed only once during the...
  8. Cannon iMAGEprograf IFP5000 - does it worth to make it functional again ?

    Hello,

    I have finaly managed to get a large format printer Cannon iMAGEprograf IFP5000
    Regarding to the previous owner "it will be necessary to replace the L printhead"

    The printer was offline...
  9. [Misc] Re: imagePROGRAF L Printer Service Tool (Ver. 1.40)_ New

    Hi,

    Where is it possible to find the L-Printer service tool 1.7 (64bit)?

    My IPF5000 drained most of the cartridges during the head cleaning today :--( ... 4 inks went from from 40% to empty...
Results 1 to 9 of 9