So, I’ve been working on Kyocera copiers for a decade now, but I’ve recently had to start working on more Sharp machines.
This particular machine has been reporting “TRAY 1_L” jams. I’ll go out,...
Type: Posts; User: Xferunit
So, I’ve been working on Kyocera copiers for a decade now, but I’ve recently had to start working on more Sharp machines.
This particular machine has been reporting “TRAY 1_L” jams. I’ll go out,...
Duplicate post
I mostly work on Kyocera's, but I've got this one Sharp in my territory which I rarely see, as it's low volume. It just came up with a Maintenance AA message, but I've no idea how to enter Sharp's...
Thanks Blackcat. Yeah, I've seen several of those sensor flags get worn down. The one between the LCC, and main unit does that and starts throwing either 1403/1404, if I'm not mistaken. I've had...
Indeed it does! I've actually had it built up so badly on both conveying and idle rollers on older machines that I had to pull out the scotch brite and scrub the hell out of them in order to...
So, I went ahead and stuck with my gut. Got the exit unit in today. When I unboxed it, one of the plastic mounting brackets had broken off during transit. >_<
I didn't want to be dinged for a...
Connecting to KFS is spotty as hell. It works less than half the time.
You can try https://rfs-us.kyocera.biz or https://23.101.190.57 You'll need the access code, however. They're having a...
So, I've got a relatively new 8001i with about 750k pages on it getting fairly regular J5018 codes on duplexing. Not to be confused with a J0518.
The manual says it's a BRCS2 non-arrival jam, but...
I did. If memory serves it was one of the clutches in the bridge drive unit.
I took the unit apart, and cleaned the clutch. Started working.
Good luck!
I would tend to agree that this machine is extremely easy to work on.
The only criticism I would offer of this machine is the ADF.
It's been an issue on the earlier models that it has...
So, the 5500i fuser unit item number is FK-6306
the 5501i's fuser unit is item number FK-6306B
Does the B stand for backward compatible? I've got a 5500i with a bad fuser, and a 5501 fuser...
Thanks for the reply blackcat. I went ahead and replaced the HDD. Just had to set scanning back up. Since it was intermittent, I decided to go with the HDD first. The machine was manufactured in...
So the problem is coming and going. Sometimes when they make a copy they get a message saying "Memory Full". Other times they can make copies no problem. I'm assuming it's either a failing HDD, or...
3550ci with a simple finisher. Ok, so plain paper exits fine. It's when the machine feeds more slowly, like on envelopes to the top of the finisher...as soon as the envelope touches the top exit...
I read that tech bulletin, and verified at least a half dozen times that it was in fact in the correct position. I assure you, there was no gap. The only thing that remedied this issue was swapping...
That is precisely the case here, Blackcat. This client has 130k BW, to 2.7k color. From what you're saying, it sounds like excessive dev refreshes won't help at that point. Just need a new unit. ...
So I'm sure we've all noticed that the developers on these models don't generally last to their advertised "end-life", but I've noticed that our customers who don't do much color printing are having...
So, here's the deal. My boss went on a call for an old falcon two that's image cycling. He decided that he'd replace the drum, and dev unit. The problem came back today. I went out there, made...
So, my boss recently brought in a FS-C5150DN on a trade-in. I looked up the error, and saw that there's a tech bulletin on the issue, however, it just says to rotate the coupling on the right side...
So the coverage on the mag roller was perfect, but I noticed that the lower gears were locked up. Manually rotated them for a couple minutes, and they freed up. Printing color as it should now.
So the coverage was perfect, but I noticed that the lower gears were locked up. Manually rotated them for a couple minutes, and they freed up. Printing perfectly now.
So I've not seen this code before. Looking up the error, looks to be a Auto-Toner sensor (C) code. I had no idea where that was, so I looked up it's location in the service manual. It appears to be...
So I've not seen this code before. Looking up the error, looks to be a Auto-Toner sensor (C) code. I had no idea where that was, so I looked up it's location in the service manual. It appears to...
Yeah. We checked the spring leads from the transfer HV. Like I said,we went ahead and replaced the entire xfer HV board, along with the spring leads.
Replaced the developer already, and it is rotating well. The transfer HV was taken out, inspected, seemed fine, and then replaced anyway. Transfer belt has also been replaced. Just replaced the...