Thanks. I won't have time to grow my fingernails out as retirement is only a few days away. Just a little gun shy with these after a bad experience with that wonderful harness.
Type: Posts; User: mttech
Thanks. I won't have time to grow my fingernails out as retirement is only a few days away. Just a little gun shy with these after a bad experience with that wonderful harness.
I have a silly question regarding the 2 wire connectors on these models that go to the paper lift motors and the clutches. I have a hard time releasing these connectors as the male connector is fully...
You may have done this but you can test the ADF sensors with sim 2-2.
I had this recently. I updated the firmware, unchecked SSL under email SMTP settings and disabled SSL in the network settings. The new firmware supports TLS 1.2.
Thinking outside the box, I wonder if the Sharp driver would work? If it would even find the machine on the network when installing? Might be worth a shot. There are newer drivers available for the...
If you print out the NIC page, does it say ZeroConfig next to the IP address?
The only time I have seen this is when the copier was plugged into a UPS. The UPS was making the beeping sound whenever the copier first fired up.
If you print out a 22-6 it should show the toner levels in the smaller increments. Should be located towards the end of the maintenance and usage counters on page 1.
I'm looking for some information, possibly a white paper or something, that says at what age Sharp will discontinue support on a model. Driver updates, firmware, part and supply manufacturing, etc.
...
You can make a 2 to 2 using the glass to help see if it is a DSPF or engine problem.
If you are talking about the internal user accounts they are accessed from the web page. Once there login as administrator and it should be under user control.
Sorry for the miscommunication. I was referring to the belt on the left side door.
I would be looking at the secondary transfer belt next. Can't remember if you can run the copier with it removed but it may not be turning properly.
I agree with checking your consumables. From the description it sounds like you are missing yellow in the colors.
We had a customer request to have the front USB disabled on this machine for security purposes (the machine is located at a bank) but I can't find anything in the service manual about it. The only...
If I remember correctly there is a box when placing your order that specifies shipping time and you need to choose 2 day shipping. 2 day is not the default. We were recently bought out and I can no...
If someone has found the right button in system settings they can enlarge the print on the copy display and it will show fewer options. As far as I know this is all that can be done to the actual...
I agree with JR2ALTA on this as I have seen it a couple of times. It doesn't take much to remove the registration unit to check this out. If it is not broken check page 5-79 in your service manual. I...
Sim 23-2 will print the jam and trouble codes.
You say it never misfeeds but you get a misfeed message. Does it continue trying to feed after all of the pages have been fed? This would give you a misfeed message but it will be more involved than...
First, make sure the power save and auto power shut off times are different, as that can cause issues. Second, does it wake up when a print job is sent to it? We had a similar problem on a MX-B401 a...
You can still use the MX560NT toner. See MFP-TB-1687. Just make sure to give them a good shaking on installation.
I just noticed on the Sharp IDNC homepage they have a banner that says they are aware of problems scanning with Office 365 and are working on the solution and will update. Not sure if that is good...
Yes, it is correct. The parts manual for the MX-B402SC shows these roller numbers. Section 4 Item 34, and Section 5 Items 32 and 34
Disabling mDNS in the network service settings solved my problem. I attached the NIC pages. I don't think I did a very good job of explaining what was going on. Thanks for all the replies.