are you using compatible drums?
did it happen just all of a sudden or after drums were changed?
in service mode ->stabilization should fix it
Type: Posts; User: davidj7
are you using compatible drums?
did it happen just all of a sudden or after drums were changed?
in service mode ->stabilization should fix it
i had a similar issue on DC5000 FFPS 6.0 turned out to be faulty RAM.
thanks blackcat
Hi
I need to replace part #A03X656203(item No 24 in P 42,PDF page 94) in PF707. My problem is I am unable to locate the part # of the bottom part which holds the knob tight in place .
I haven't...
result so far . did on the similar lines so far, lines faintly visible in certain colors . I am 100% sure its related to K .
Will update as I progress
I will update tomorrow . thanks for the response
i am also facing the same issue. Did you figure out the problem on your machine?
Thanks
Hi
Having an issue when images of smaller size are sent to the printer using hot folder. It scales the image to the paper size.Like when i put in an image about the size of A3 it blows it up to...
Thanks for the info
So I need to have the full service and parts manual and not just few pages?
Hi,
I am looking for the maintenance /parts replacement schedule of Konica Minolta bizhub C1085 and Pro1100 something like Xerox HFSI list .Like part A has to be replaced after 100000 A4 prints etc....
have send you a P.M
put a new IBT assembly :D.Looks like its problem solved
so after few days something new came up. colour inconsistency . Every print comes out in slightly different tones. Gradation adjustment stabilizes for about 10 prints then everything changes .
...
Hi
I am looking for 848K13702 xerox 4110 developer housing assembly or if any one has a used unit i will take that too if the auger inside isnt having any problems. My problem is the auger inside...
i wouldn't touch any electronic part unless its causing problems. just my 2 cents.
Found the magenta problem to a loose flat cable on the laser unit.machine is working fine now. Don't know what caused the yellow to malfunction in the first place.
i did recheck connectors of HVT and laser unit.
I am not sure of the counters. I will check that
So I wasn't having any wierd problems for a while and life was beautiful . One fine day a bizhub c220 was not printing yellow. Put in new drum/ developer assembly/ High voltage pwb/ laser unit in...
If you planning to used a DC260 developer assy on a DC5000. Go ahead it would run just fine.
i am not 100% sure but i think you can reset HFSI using the machines control panel .
you just have to reset the HFSI on the machine . It would be much easier if you can get a tech to just reset it for you .
i am printing just straight jobs no frills ,nothing . just a file with 100 pages duplex thats all some pages colour some black and white .
i am having ic 602c controller. I will try with foxit on Monday. I ve heard on the 8000 controller it works fine black is counted as black . wonder what the setting on this one.
Hi
When i print a file with multiple pages some black and some colour in 'auto colour mode' enabled in printer driver. All the pages are counted as colour .I print mostly from pdf and corel. Any...