Hi everyone,
Just after some advice on error code c-9403 on a konica c3320 - CIS LED lighting failure (back side)
The machine pops the code up on switch on, unplugged and reseated all flat...
Type: Posts; User: vedder
Hi everyone,
Just after some advice on error code c-9403 on a konica c3320 - CIS LED lighting failure (back side)
The machine pops the code up on switch on, unplugged and reseated all flat...
We had something very similar to this the other day, after scratching our head for a while and changing various things, we unticked "spool documents" and ticked "spool directly at the printer" in the...
Thanks jmaister!
Went out and it worked perfectly. Removed all the drivers, packages and ports (I think the IT dept had been playing). Re-installed the KX driver (latest) on the server. programmed...
Hi Blackcat,
Thanks for your reply. I've attached a screen shot of the driver info. It is all kyocera from the looks (It's the latest full function driver from UTAX's website). The only other...
Hi Guys,
I wonder if you can help. We have installed 2 x Utax 3207Ci (re-badged Kyocera TaskAlfa 3253Ci)’s in a school.
The requirement is that it is locked down with account track and private...
Hi tsbservice,
here is a list of what I replaced,
A5C1M40600 - high voltage board
A161R70322 - dv contact assy
A161R70211 - hv contact ass X4
A161N12P01 - charging wire k
A161N12N01 -...
There is definately a problem, its not a new thing, check out this thread it was started in 2014. Some people seem to have it more than others, like I say I`ve only come across it twice, 1st customer...
Hi Copyman,
Yeah I only went thorough Konica as a matter of procedure, wasn`t convinced myself, but as this wasn`t the first time they had had this issue, I had to get Konica involved. I have...
I am currently facing this problem, machine going through cyan dev units, customer has always replaced consumables when required, all tcr readings are correct, the last time i went I replaced dev...
Thanks for the advice guys, its greatly appreciated some bits to look into there, we are predominantly windows people, and everynow and then a mac issue crops up which can cause us issues.
To...
Hi everyone,
I've got a bit of a head scratcher that I hope someone has come across before and can offer some suggestions.
Installed 2017, on MACs printing fine.
Customer came back after...
Just a quick update on this, so the old machine continued onto the other trays with the trays grouped together, and in the job program tray 1 selected, great, this new machine set up exactly the same...
Hi,
The program is set up to take from tray 1, but so did the previous machine and that continued onto tray 2, the program is set up identically to the old machine (the previous machine was a...
Hi,
Thanks for the reply, we have created the paper tray group via pc login into the machine (tray 1,2 and 3) but still stops after running out of tray 1 only on copy jobs.
🤔
Hi everyone,
We have a bit of a head scratcher that I`m hoping someone may have come across...
We have a 5052Ci with booklet finisher and 4 tray configuration. The customer has set programs...
Just an update on my problem, the mfpb didn`t fix the fault (wasn`t massivly confident it would to be honest)
In the end we swapped the Emmc board and fingers crossed everything seems fine so far.
Hi, was wondering if you reached a solution on this, I am having the exact same issue, 0x0767 codes, internal error has occured, fa14 codes. We have tried a new hdd, same problem, does it when the...
Konica c203 noise!
We have condemned more than 1 machine due to this problem, as mentioned above, it`s a stinker of a job getting to where you need to get to, the whole machine needs ripping apart, ripping it apart is...
Morning all,
We are currently having a issue with a UTAX 5006ci (TASKalfa 5052ci) which is printing faint yellow, it is there, but only just, the other colours are fine. So far on recommendation...
Quick reply to your messages.
The customer actually cancelled the call so I never got to the bottom of this, I will try what you all suggested if it returns, but fingers crossed its fine now.
...
Thanks for the replies guys, much appreciated. I will check the seating of the transfer roller, but it litterally went from good to bad with the firmware, I hadn`t opened the machine or anything like...
Morning all,
Just looking for some advice if anyone can help, we have a utax p-c2660 mfp (M6026cdn) which had the colour registration problem that required the firmware reset procedure and set up,...
Hi, this may be no use to you at all, but you never know, do these trays have the round dial on the front which have the paper sizes on? I have had issues where that dial was inbetween paper sizes...
we are having a problem on c227 transfer belts (not sure if they are the same as the c284) we have had a few fail after about 20k on the machine, all on original toner, I have had a conversation with...