need a fuser for a phaser 6280 if anyone has one laying around. thank-you--tuey
Type: Posts; User: tuey
need a fuser for a phaser 6280 if anyone has one laying around. thank-you--tuey
thanks, i saw the metrofuser pics, not enough info for me to be sure. i have a couple of b2865's at a pharmacy- probably get one turned around to see fuser. i bought this at an auction for $3 - cheap...
just found the fuser again-- i can't find the original box and am second guessing the part #- 41x1115. it is not on the fuser anywhere-- the only lexmark type # is 50g3900 which doesn't come up...
it's for an ms820 among other models. pretty sure the fuser resets the maintenance message-- nothing in manual about reset procedures. guess i'll have to buy an aftermarket reset device and install...
got a fuser that is brand new- but out of box. don't know if it was ever installed. does the counter on lexmark fusers reset machine when installed-thereby making it unable to reset again or do they...
exactly right sinchan, thank-you. local internet provider seems to do this occasionally. thanks for the help--tuey
i found the 20.107.11.000 firmware and installed it- did not solve it
use this in house and this morning all scans to email fail and message is--job failed due to invalid account or password. worked fine friday and nobody was in building this weekend. i can get in on...
raining today and a slow holiday so i replaced the belt. 2 hours-1st time, probably do it much quicker second time. thanks for the heads up about the ribbons-- different set up than usual and i've...
are some of these fusers inter-changeable ? have some fs2100 m3540 p3145 m3145 fusers and they appear identical, plugs etc look the same. thanks--tuey
had this happen to me last fall. brand new p3145 running 176gsm paper through the bypass-220gsm is max, not fusing. spent many hours experimenting and working with tech support and here trying to...
i wont know if the belt is damaged until i get in there-- i can see the belt but can't see the ends. bought a new one for $12 shipped so it will arrive monday-- wasn't gonna gum up the job for lack...
yes, scanner drive belt is the issue. customer gave me the machine and lots of supplies. belt is laying loose under scanner glass. after i organized the steps to replacing belt it doesn't seem too...
got a 292.01 scanner locked code issue that i will be addressing tomorrow and customer says lock switch is frozen - opened. looked around manual to see what all is involved with replacing the...
only ever used xante toners, but you can use ricoh in the xante if you change the chip. i think you're confused
i use ricoh fusers, drums and developers and t. belts in the xante- no adjustments needed. have company from australia that does toner chips.
i have tried 2 other known good belt units, same result. gotta be the sensor or board and the board is the only one that is replaceable or spared. it's an odd one for sure
no visible error code, can't print list due to error. could try hooking my laptop to it and maybe available then. that sensor test absolutely is not available on this printer. in EDC i go to test...
the models that use this transfer belt are clp680-clp415-clx4195-clx6260-c2620-c2670-c1810 and c1860
customer called with error, changed belt and message remains. manual says it could be a tension home sensor error, no other reference to that sensor in book. dug in and found sensor and cleaned it...
thanks, they musta unloaded them from the boat, became available, ordered and installed
i am finding that lately everyone says they have everything- until it's been ordered. i am not a ricoh dealer but have accounts with most larger wholesalers. glad you are able to get them. tuey
have a customer that i sold a sp-c830 printer that is getting the drum warnings. was able to get the color drums ok but can't find the k drums anywhere i've looked. didn't think it would be a problem...
have one at a pharmacy with 900k and threw the 111 code--30/34/35. hoping to remove printhead clean reassemble and move on. it did help me get past the code but guessing it needed more than that as...
looking for sources for lexmark printers and mfp's , any goods ones that i could contact? thanks--tuey