Search:

Hi Everyone
My trouble has been resolved by remove resistor R 304 (4.7K Ohm ) in back side of CPU to R 318 position, install sram board T 100 syoiu 232 to system board and up fw E 855 in to system...

Hi Everyone
I have a question to ask everyone that I have a system board Toshiba e studio 305. Looking at it is the same board of E studio 855. I replaced Flash rom of E 855 and SRAM board. When...

Hello guys
I'm a copier technician in Viet Nam. I ask every one who has a service manual of fuji Xerox V3065 giving me a link for download. Thanks for help !!!. My email address :...

Bạn có thể gửi cho mail firmware2000@gmail.com để mua.

Check white platen or wipe it with water.
CCD board fault
SLG board fault.
Good luck to you Riyadh

Replace two thermistors. It will be Ok.

Hi Friend
Does It display Wait on Screen? If It does,you check fuser unit. Another hand, you try format HDD.

Hi Riyadh
You try to replace another Batery supply power for SRAM IC

Hi!
Let me know your email address, I'll send link for you to download firmware. My mail : buuluutran@yahoo.com.vn

You access 08 - 692 touch two points 1/ uper left corner point; 2/ lower right corner point to adjust touch panel. That's all.

Hi
You can contact with this email service2000@gmail.com to buy. In vietnam, I buy service and firmware through this email.

Hi
you watch the fan on system board. Does It work? If no, may be your system board is out of order. If no voltage on input of power supple board, you check the CB on unit at wire core.

Hi
If the machine had worked normally It didn't need do up date OS. Remember inform user should shut down machine, don't switch power off directly.

You can copy the latest version 4006 to usb but you must do up date 6 items because your machine's firmware may be older than my firmware. If your copier's firmware version is equal mine. It's enough...

You download firmware to your computer, extract file and copy all to usb 512Mb without create any folder. Turn off the copier and remove all dongle out machine. Plug usb contains firmware to machine....

Hi
Maybe your machine has a trouble with HDD because the machine was off without shut down. I send you two link for download firmware of two version:...

You power off and press & hold down # 13 power on wait for a few second release and power off/on.

Hi
After you processed "service recommend ...." the black lines appear on copy, you check your Drum, cleaning blade. How are they?. the message Time priodic ...... may be cleaning web is near out...

because you have 42 days. May be the machine does not accept/ or you access 08 - 799 force delete to 0. After that you do as steps which I posted to you.

Hi friend
You are using trial printing function? You wait the msg displays " Remaining trial days 1". You do following steps:
1/Access 08 - 203 change from 0 to1 --> enter. Power off
2/Press and...

Dear Panda
You live in Viet Nam, Don't you? I saw your post on AHA chuyen gia forum. Up to now have you not done update firmware yet?
I guide you a simple method to do. You only choose USB has the...

Dear friend
You power off machine, press and hold down 0&8 buttons and power on. Wait the beep sound release two button. The screen appears D letter when Wait letter disappears you access...

you check thermistors; maybe need replace.

That means your machine needs doing maintenance. After doing, perform 08 - 800 set to 0 and 05 - 290 doing process control. When these words display, the machine's Drum life is near 400K copies needs...

Hi Riya..
After you update firmware. You must access 08 - 947;693;684 and 690 format HDD. You make some or more copies. It's easy to shut down. Good luck