Hi ,
Remedy : Below issue has been sorted out by replacing tension roller bush(broken) in the TTF unit ,Now machine is working fine
.6211562116
symtoms: Random Horizontal white stripes only...
Type: Posts; User: gksapple
Hi ,
Remedy : Below issue has been sorted out by replacing tension roller bush(broken) in the TTF unit ,Now machine is working fine
.6211562116
symtoms: Random Horizontal white stripes only...
Hi
in this case replaced the toner supply roller and dv unit Also but issue remains
Hi
it’s a random line , measuring the distance couldn’t help me
Hi ,
symtoms: Random Horizontal white stripes only on the rear side of the machine which is perpendicular to the feed direction.
Action Taken :
1. repalced the TTF Spiral roller.
2.replaced...
SYMTOMPS: 021012: Jam Code (Staple Finisher-N1) 1012
Type: DELAY
Sensor Name/Description: Finisher Feed Sensor Delay jam
Sensor ID: S102
Paper Jam only in A4R single and duplex , A4 is working...
Hi
I am also having the similar issue with inner finisher F1(e56f).
Have u fixed your problem .
if yes please share the remedy that you done.
Hi
I am also having the similar issue with inner finisher F1(e56f).
Have u fixed your problem .
if yes please share the remedy that you done.
hi facing the below issues.
*Able to take copies from the platen
Symptoms : 1. Counter Data and serial no is disappeared .
2. Dadf is dead 3. No Network...
hi
As You mentioned ,adjusted the belt speed ,lines disappeared. Issue solved .
adjusted value -25
thank a lot
hi
A4 is the feeding direction.
Hi
symptoms : Black lines on the images.
action taken : cleaned the laser unit ,primary and pre transfer contact point ,dv drive assy ,drum drive assy and re re fixed .
1. Replaced primary...
hi
Harness between the sensor and df feed driver pcb has been replaced issue solved.
thanks
Hi
Symptom: 0100A6 jam code while Turn on the machine.
Action Taken :1.cleaned SR-21 sensor again same issue then Replaced the new sensor.
2.Firmware updated to the...
Hi
want change to change the job storage time to the maximum of 3days in secure print ,
logged in as administrator but the option is grayed out .
setting & Reg - fuction - print - job storage...
Hi all
saddle fold lead adjustment has been done machine ok. please have a look on the pdf file attached.
thanks & regards
gksapple
Hi
Having Saddle fold alignment issue in finisher-AN1 .please have a look on the adjustment.
thanks & Regards
gksapple
Hi
Doa with canon you mean full unit (pod lite deck -c1 ) or any specific .please clarify.
thanks
gks
1.media size from the pod deck lite c1 -330 X 482.6 mm
media size from the tray 1 & 2 -330 X 482.6 mm
2.yes all the packing tape has been removed.
3.Paper Picked and started to feed ,entered...
Hi
symptoms
Frequent paper jams from pod deck lite -c1 in a new installed machine IPR-C10000vp , when printing on 350 GSM media. same media is working fine from the machine tray 1 & 2.
Jam...
Hi
first check the finisher is detected or not . check the accesories status in the service mode.
COPIER (Service mode for printer) > DISPLAY (State display mode) > ACC-STS
SORTER 1 Dspl...
Hi
Remedy
Replaced the Registration patch Driver Pcb ,issue solved .
Thanks & regards
gks
Symptom : Error code E5f1-8000-02 & E567-8002-02
After dip switch adjustment for saddle staple position .
Cause :Finisher front door switch assembly spring out of position or broken
...
Hi
facing a quality issue in a recently installed image press c710
symptom: No consistency in each printouts ,color getting variations in every printouts.But no problem with PG test pages....
1.interchanged and checked the magenta transfer roller in the itb & primary charging assembly.
By the way its happening only in the magneta ,other colors were fine.
thanks
gksapple
Having copy quality issue in Magenta.please have a look on the attached image.
Issue : Rear side of the printout doesn't having the proper magenta toner filling in all media even plain media.
...