Search:

thanks for the information, but I have already checked it,

My IR 6570 boot normally and display "READY" on the panel.
If I make a copy job and when the paper enter the developing unit , it will always stop there and give an error 100 - 001 display on the...

Dear Sir,

I have an error 00225-0001 on canon IR5075.

The scanning lamp lights on but it can not move to right side.

Thank you for giving a solution.

Thank you Sir.

Will it cause a damage to the laser itself or to the other component?

The Laser Shutter is activated by the pin on the Primary Fan Duct Assembly.
What will happen if I just activate the laser by making a permanent activating that I push the knob(button) on the laser...

Hi..
I Got the same problem. Error 004-010 or 004-103 on canon ir5075.
But one day ,after touching some cables on the left side of the machine then the machine works without any error. I dont know...

----

Check the gear of the sensor motor (duplex)

Have you tried to make a minimum height of the transfer corona.
I found the similar problem on ir5075 then I set the height of transfer corona at minimum value solved this problem.

ggrrh, That's a laser problem.(and maybe the drum is also damage)
How do I know that?
Bellow I Would give a short description from the first time I got this "Solid Black Line".
1. I have 3 IR5075...

I ever had error 002 which cannot be reset. Then I change thermistor (maybe sub thermistor too) and it fix the error.

I am sure error 001 can be solved by changing the thermistor too (also sub...

Yes, The only way I can do is using the 3 or 4 tray that is set to A4R.
I have done it for A4 purpose.
---
Please look at the drum.
I have a good drum. when I put it on the machine then the drum...

No.

Dear Friends...

I have a weird problem with my 2 Machine. IR5075.

The result copy image always has a solid black line (width : approx 20mm )
at position 3 cm from the top of paper (A4 Paper)....

Thanks!! Working !
You have ir5075 too?

Ir 6000 ànd ir5075 :)

Would you like to send me the free link for downloading the SST and the FIRMWARE of CANON IR 5075.
I will really thank to your kindness.

26932I have tried this unit to another running machine and the it works perfectly.

In which part the sensor is attached? if it is attached in this unit then the sensor has no problem.

could it...

no problem with toner sensor.

I have already try it on other machine (DEVELOPING UNIT)

Dear All,

I have problem with Canon IR 5075 toner supply mechanism.

Here I attach an image.


26914
All gears as shown by the red arrow doesn't rotate.

Thank you.

Right now, I don't have that "Extension Card Setting" option on the "Additional Functions - System Settings".

so the new option (Extension Card Setting) will be appear automatically...

Dear Friends.....

Is it possible to print by wireless connection (WIFI) on Canon IR 5075?

Is there any add-ons for IR5075 which can make it possible to do?

26426This is the delivery that has problem. After replacing it, the problem is resolved.
So I want to repair this unit. Which part of this unit is broken or what's the problem of this unit?

[QUOTE=Taggerung08;436411]Also what is the specific Jam Code?[/QUO


There is no jam code.

It is from print job and copy job.
I am sure that the problem is caused by that delivery unit ( I have replaced delivery unit from a good machine and all problem solved)

No, I don't use finisher.