I have problems with this printer. I can print to it but cannot access web interface. Any settings required user/password - Admin/Admin and DeviceAdmin (5000) credentials working but I want to turn...
Type: Posts; User: AlexRust
I have problems with this printer. I can print to it but cannot access web interface. Any settings required user/password - Admin/Admin and DeviceAdmin (5000) credentials working but I want to turn...
Good tips. Thank you guys. Will try when I am visiting this site.
Yes I did.
Kyocera Mita FS-4100DN. After replacing fuser everything seems to work but when you turn printer on it produces 2 loud clicks coming from the fuser area.
What did I do wrong? Please help.
thanks for the tips. Will try them all and report back.
Hello. Please listen attached sound clip (close to the end) for strange sound. Is anybody can point me in the right direction to fix it.
Thank you in advance.
Thank you guys, replacing charge roller did fix it.
Thank you. Will replace it and report back.
Hi guys,
I am trying to fix Kyocera 5501i - see attached sample. Can somebody please share from their experience which roller causing this "dots" at the top of the page on attached sample. I cleaned...
Is Anybody here can help me with this? I cannot find on Xerox website anything about altboot option for 8570...
I am Kyocera tech, I inherited this beast and need help. I am happy to hire tech but cannot find any locally.
Can I hire you?
The link I provided is for firmware I was trying to install. I...
Can you provide instruction on how to load firmware via ALTBOOT? Should I try to load same firmware?
Firmware downloaded from Xerox website:
https://www.support.xerox.com/en-us/product/colorqube-8570/content/128422
I have tried via network it was loading till 46% and then reboot and still old...
Please help - after upgrading firmware on Xerox 8570 printer rebooted and nothing on the screen and red light flashes. Can it be fixed?
Thank you. So after I sent file to the printer it will recognize upgrade and will start upgrade process automatically?
Can some body please provide more detailed instructions on how to upgrade firmware Xerox ColorQube 8570. Release notes explain in details on how to upload firmware to the printer but does not...
All good. New toner cartridge solved all problems. Thank you all.
Thank you. New toner will arrive on Fri. Will report back. Any chance to get firmware?
Here is what installed on my unit:
System Firmware:
2LV_3F00.012.003
Engine Firmware: ...
There are some additional strange behavior - it will print without toner cartridge; when I turn printer on without toner it show "Non genuine toner installed" message, "Stop" + "OK" will clear this...
Please somebody email me link to download latest firmware for Kyocera FS-4100DN.
Thank you
Kyocera KM-5035 does not wake up from power save mode. It show blank screen but self check was done. Disconnect and reconnect power at wall plug brings copier to normal operation. What should I...
Can anybody help with firmware for Kyocera FS-3920DN?
I would like to get:
System Firmware: 2J0_3000.007.016
Engine Firmware: 2J1_1000.004.002
Or most current if above not available....
Yes. U265 was set to "0". Following your instructions did fixed "Unknown Toner..." error. Thanks again. You're the BEST!
Will definitely try it tomorrow and will post results. Thank you very much.
After replacing Hard Drive and performing U906 on Kyocera KM-2560 I am getting message "Unknown toner installed" but we always use OEM.
Any help to get this machine to recognize genuine toner would...