Hi,
I'm looking for Xerox Primelink C9070 EDOC, does anyone have the installer.
Thanks in advance
Type: Posts; User: mercadoven
Hi,
I'm looking for Xerox Primelink C9070 EDOC, does anyone have the installer.
Thanks in advance
Hi,
I recently started having same issue in one Versant 2100 machine, color to color misregistration, it could start in the middle of the sheet, sometimes just the last 2 inches, during a run,...
Hi, I'm having that same issue with a Versant 80, Can you share the NVM values that helped to correct the problem?
Hi,
I'm pretty sure I've have seen the procedure for the 5755 posted in youtube, you may want to search for a guiding video there.
search for smething like this "Xerox WC 5755 working without...
Thanks a lot, I'll check the upper sensor, swap and test, and let know.
HI,
I have a Xerox versant 2100 with error 077-339, error description says, lower cooling belt walking to outer side, and It does, if I take out the assembly and center the belt it works for a...
Hello,
Just some info that hopefully help you out.
You can realize if the fiery is working by presing the all services button (silver button on copier keyboard), by doing this you should see on...
HI,
I have a DC 252, completely dead, when I turn the switch on, there's blank screen, no dadh move, no bypass move, I can only see green 5V and green 3.3V led's on ESS PWB, no 12V or 24V, no...
Hi,
where did you get the new memory you installed? did you get it through xerox? I had the same issue with a phaser 4150, Problem solved when I tried different memory brands until I found one...
Hi,
You should calibrate the creo server, I haven't seen any creo server on a 700 machine, but I have worked with creo servers on DC 250 and DC 5252, you image is solarized and most of the times I...
Hi,
First try clear server, this action will erase any held print job, any printed job, archived job, logs, scanned jobs. You can do this from CWS log as admin and select from server menu the...
hi
before reloading software, I would try to disable snmp protocol, you can find it in the computer printer properties under the port tab, ckeck port settings and uncheck snmp. If this does not...
The problem is with all colors, I'll suspect the drum (Print cartridge), The 1st BTR (which is inside the IBT) or the IBT by itself. From my experience I'll check the 1st BTR, since this is and old...
Hi,
something similar happened to me a long ago, not this exact model, but a DC252. There were no codes and one color was absent.
There is a spring that keeps together the Developing unit and...
Hi, if you want to use FTP protocol, you need to create a FTP site on your PC (Win XP, Win 7, or Win 8). To do so, you need to add windows features and add IIS, you can achive this by entering...
Are you able to scan to the guest templates (BWGuest Grayscaleguest Colorguest)? Does your machine has the crossover network cable going from the machine to the fiery? If yes, then the fiery database...
Hi,
I've a lot of experience with Xerox 700 machines, first let me tell you that, the xerox 700 machine itself has a network port which should be connected to the fiery through a crossover network...
That's some serious problem, reflects corrupted data or machine serial inconsistency on two or more PWB's (MCU, CCM, or IIT) when you replace PWB's, should be done one at a time to allow the machine...
Sorry, up to may knowledge there is no way to recover the lost meter readings.
Hi,
Sometimes the scanner carriage does not move completely to the left when coping from the DADH provoking black copies, you may try cleaning and may be add some lubricant to the rails and make...
HI,
Configuration mismatch indicates that you have installed or removed a component ( hard drive, fax pwb, disk image HDD), I've found that some times is due to an exhausted nvm pwb battery (it's...
Hi,
Check the dip switch(two small white switches) just below de FF screen, they sholud be in the off position for normal operation, you switch them to the on position when loading software to the...