Search:

I appreciate you trying to track down that issue. I heard other posters questioning the viability of this particular fuser. We have replaced 4 units in the past 10 days in units less than a year...

Iam eager to here what you have found as I exo\perienced exactly the same issue, our fix was to actually replace all of the side door screws, the last technician lef t out a screw which allow a...

Fellas, thank you for your replies. Yesterday, we disabled misfeed detection. still experienced jams just past the fuser. appears Transport roller 16 is not rotating . since we have changed the...

1.7 M copies. Mxm623 misfeeds 95% of the time while Simplex copying. Accordion fold after the finisher before hitting the sensor in the delivery unit. Problem does not show on duplex copy, 2 to 2....

thank you so much

Guys, It appears that I am missing something. Could you tell me which models that you are discussing? We have had a couple of issues with waste toner filling up too fast, combined with eating the...

Jii, Anytime that we are having a tough to discover issue with J0533s we do a thorough check of the right end of the unit and makes sure that ALL and I do mean all of the cover screws are in place...

Santander makes a great point, as we have experienced that challenge first hand as well. Do you get an 0640 code when your hdd fails? or is there someother code?
Thanks, and good luck!

[QUOTE=copydocinc;536662]I have now replaced the hard drive on this particular customers machine, 3 times over a 3 year period.
Have not replaced a hard drive on any other model or any other...

After going through the nine different versions of fusers and the adjustment of 1 sheet can go thru but 2 cant horse****, they finally determined a defective belt plate in manufacturing. Once we...

Black cat, my guess, from all the details included is fuser with UFR accumulating toner buildup.

Pretty good, ay?

Thanks for responses. Sorry for delay in getting back. Was out for a few days.

The problems is a thin film of toner adheres to the teflon (upper) fuser roller, beginning in the middle of the...

We have also experienced the f248's. We have had some luck with turning off unit, unplugging the network cable, turning on the unit, waiting for it to come to ready, go to job listings page on the...

I am not a believer in aftermarket toners. However, in this case, we are experiencing similar issues with the fusers on Kyo TA-5501's. I posted last week but have not been on the forum until now to...

In last 2 days, we have come across 4 FK6306's that will not last 200K. Toner buildup. Updated firmwares. OEM supplies. We are under the impression that they should be going 600K. Any ideas? ...

In light of today's economy combined with technology that hardware manufacturers have available to deter 3rd party supplies, I struggle to believe that third supplies provide a reasonable value at...

Now this is a very impressive string. I would be very curious to find out the status of the challenge. Great effort!

Toshiba BD 8412. 2 updates. Cm11 took 8 hours and still never worked. Toshiba had to by a bunch back.

I made the same mistake. Looked very much like a "B". It's not. Corrupt print job. Some times turning off will reset....sometimes not. Turn unit off. If it pops again....power unit...

We also have 100 or so of these out. Great product. However in one week we were hit with 5 or six that would not come out of sleep. Of course....increase the delay before a unit powers down would...