I did it, but it has a limit, I left it to the client as best I could.
It's up to him to spend money to make a good PM.
Thanks.
####==============================####
Lo hice, pero tiene...
Type: Posts; User: chivozx
I did it, but it has a limit, I left it to the client as best I could.
It's up to him to spend money to make a good PM.
Thanks.
####==============================####
Lo hice, pero tiene...
Thank you very much to all.
I changed the developer and it was fixed.
He does not even have a pure black but it is because of the drum that is out of his useful life.
Greetings.
...
Hello,
I can not find solution to the light impressions in a Konica BH Pro 950.
I think it's transfer failure. I have changed the transfer wires, charge corona and charge wires.
In the opc it is...
Hello,
I managed to clone a HDD of OKI ES3640e and it works. My problem was that "Initializing" remained and could not print.
The method I followed is with a laptop and CDLive of CloneZillla....
The drum is new, no wear. It may come wrong, but all the developer falls into the gears
Is this piece you mention?
32103
Probably its a transfer problem.
Probe whith other tipe of paper, change transfer values in service mode...
No, the problem is on the bottom of unit
Yes, but with another original development unit it do the same. A tot of develop and toner spits
Hello, the imaging unit magenta toner developer and spits the bottom of the unit.
I tried it with another developer station and follows the failure.
The drum is new, the charging unit cleaned it...
Nothing?
I have to change the purple fan cable fuser. I think I have clearly identified the P/N, but there if you can confirm it.
I leave some images.
Thanks
###=================================###
...
Hello,
In a Konica C224e me when printing code C2558 appears in thickness 4, other weights the same job is printed correctly.
I tried to make adjustments of density and toner supply, but...
Hello, I have a Xerox Phaser 6000 when print automatically delete the file from the print queue when it reaches 512kb.
I tried to update firmware but does not. From the Xerox website is the...
Muchisimas gracias Vagner.
Funciono a la perfección pulsar cisnco veces Utilidades y marcar el codigo.
Un saludo.
Menos lo ultimo de pulsar 5 veces esta todo probado y no funciono.
En un rato voy al cliente y comento.
Gracias.
Hola, Tengo un nuevo cliente con una C6501. No puedo entrar al Service Mode, me pide CE Authentication. He probado con el codigo "92729272" pero no consigo entrar.
Imagino que tendre que cambiar...
Gracias.
¿La bateria tiene P/N?
¿Podrias mandarme copia de la pagina del despiece donde se vea la bateria?
Saludos.
####=========================================####
¿Tienen toner los cartuchos?
¿El nivel de revelador es el adecuado?
Tube un problema similar en un C450 y era por el fusor, no calentaba.
####=============================####
Do toner...
¿Has hecho la calibración automatica desde el modo técnico?
####==============================####
Have you done the automatic calibration from the technical way?
No te puedo ayudar a conseguir el firmware, no tengo acceso a Infohub.
¿Instalaste la última version de PPD que hay en la web de Konica?
Si tienes un PC a mano prueba a imprimir a traves de él....
Prueba a hacer un "Trouble Reset"
1. Maquina apagada.
2. Pulsa Utilidades/Contadores.
3. Sin soltar tecla enciende la máquina.
4. Deberia aparecer en la pantalla un boton con "Trouble...
Konica
Ricoh
Canon
Xerox (I'm starting)
Deja la puerta derecha abierta y enciende.
Si arranca y te pide que cierres, hazlo y a ver que pasa.
####==============================================####
Leave the door open and turn...
Debs1964 tiene la causa/solución más probable.
####================================##############
Debs1964 is the cause / solution more likely