xerox are testing belts at the moment, so you dont have to buy the whole assembly,i have seen one and they look like the original, the ones ive tested from ali baba or aliexpress are very good,...
Type: Posts; User: mickey singh
xerox are testing belts at the moment, so you dont have to buy the whole assembly,i have seen one and they look like the original, the ones ive tested from ali baba or aliexpress are very good,...
you can use versant 80 toner, change the colour handles over and get a new toner chip and away you go!
Never rule it out! But was the toner on the surface solid or powder?
Is the toner genuine? I had a few that rattled inside the toner cartridge due to solid lumps being in the cartridge, even on genuine ones also, if it was okay after developer change for 200 prints,...
Yes ive heard back from him, he says it will work on colour machines as well, dc550, 700 etc, then requests 50 dollars for the software, payment only via weston union, i asked for a video of software...
Im sure i have one somewhere, ill check, do you still need one or found one?
Check bottom drum seal myler, and it could also be compatible toner causing the issue!
can you copy from them? if so its more likely software on the c75 hcf mismatch, ive had his before on a j75 with a c75 hcf, can copy, but fiery doesnt see it!
Theres a belt on the inside of that drawer where the pictures show, theres also about 8 pulleys and bearings, you need to clean the shafts and bearings out, dont grease or oil them, then retension...
Ive reset thousands of 550 chips to sold type, so there accepted in everything!
I use a machine called iprog from korea, resets genuine xerox chips! And also alot of other machines, canon, ricoh, etc, easy to use and decent on click reset charge!
Yes mate, change chip and front colour handle and its all the same stuff!
Try tx.ltd@outlook.com,i can provide screen shots if needed?
I did send it to you a year ago,still no license, after numerous emails from you asking the same question over and over again, and responses given back a month later , i gave up with you! Take my...
Hi, im a freelance technician on xerox products with 15 yrs experience, pm if interested
Are you sure you can do this?
Is cyan causing the issue?? Check trc control and set if the toner house sensor is reading correctly,usually withing 50 bits of each other, it looks as if the sensor is starving it of toner
Where abouts in london are you? Pm me your details and ill give you a call
Dont remove battery, it will kill the metered pin and reset to default, it also kills the software on the pwb, you will most likely have to purchase a new nvm pwb
Check registration gear first mate! Common fault for then to deteroite
Check values in toner control, could be toner housing not reading correctly and starving tank of toner
There is a drum arcing in the 2nd pic, fix that and run reg setup and it will work
Try all colours at 26% it will show more
Did you print test pattern 11 in single colour also?
I have alot of good used working parts in full.woekijg and tested order for xerox j75,770,700, 570,560,550, 260,250,242 etc, mcu,ess,iot,feed heads,laser assys, ibr assy and we stock new t5 drive...