Hii All
Is it possible to setup default scanning resolution from 200 to 150 dpi on MP2001L/MP2501L, and also make default scan methode from ARDF Simplex. Thanks for your advice
Type: Posts; User: Yetno.0103
Hii All
Is it possible to setup default scanning resolution from 200 to 150 dpi on MP2001L/MP2501L, and also make default scan methode from ARDF Simplex. Thanks for your advice
I need help with Ricoh Pro c 900s for SC 998, what should i do .....
It's so simple to do what you want. you can used Adobe acrobat reader profesional 7 to do it. put your documents into adf or platen cover and then used adobe acrobat reader profesional 7 to make...
I agree with you, we can produce 100 % persen solid print, but mybe we can produce until 80 %, i used DTP and CLP simulation 1 at printer driver, my be you wanna share me other setting to get solid...
Hii All
My custumer want to get solid colour and image with gestetner MPC 2030, he used this machine for book cover printing, generally he used Art paper to print it. Any one here know how to...
You should do :
1. Check drum, developer and also cleaning blade, if counter reach limit, replace with new one
2. Check what kind toner you used it, original one or OEM
3. Clean transfer roller...
You reseted already many times, have you check cotton on the bottom of waste ink sensor, check if cotton still white, if no try to replace with other cotton (white one), and then do SP7804-005, if...
Dear All
This is link for service manual for Gestetner/Ricoh 1312/1502/1802, download it at this link File name: SM Gestetner 1502-1312-1802.pdf File size: 9.28 MB
Hii All
I want to put MPC 4000/2500 toner to MPC 2030, any negatif effect when i do it ??
Thanks
Dear ALL
I want to know head operating when printing/copying color or black and white documents. this machine used cmyk ink for copy/print black and white documets or only used black toner
...
Hiii All
Is it possible to used IPv6 on windows 7 for Gestetner MPC 2500, if yes how to set up connections both computer and machine... thanks for your help
How about USB interface, if you can print with usb interface, and ping replay appear when you connect with laptop but cant print or scan from lan card,your NVRAM and EEProm need replace with the new...
SC 542
# Error Type #
A
# Symptom #
Fusing temperature warm-up error
#Possible Cause#
The fusing temperature does not reach the fusing standby temperature of 45oC
I agree with you Toner Mungkeh, but if you need KC-3 Service manual and part catalog, send me email at yetno.0103@gmail.com
SC 541
=Symptom=
Fusing thermistor open
The fusing temperature detected by the thermistor was below 7°C (44.6oF) for 5
seconds, or 2 seconds after reaching 45oC (113oF) the temperature does not...
Hii all
is it possible to print id card on mpc2030/2500, as i know mpc2030/2500 cant print id card paper (PVC paper) any brand id card paper can use for it
thanks
Thanks for your help, ill try it tomorrow
Hii All
How to know total counter MPC 2500 for each Drum and Developer, I Wanna to replace drum and developer but i so confused how to know total counter for every part.
Thanks
When you install new bicu, you must install old nvram to new bicu board (because total counter on NVRAM). If SC 995-04 appear try to enter factory sp mode and then enter sp 5807-02 (Area selection)...
Finally i know what is the problem is, I enter factory sp mode and change SP Mode 5807 (Area Selection) to : 5 for Asia, by default area selection is 1 for Japan, and the other options 2 for NA, 3...
Try to download it 1st to ur computer with web image monitor, open browser application on ur computer e.g mozilla firefox or internet explorer, enter ur ip address machine on the adress bar and then...
I Attach Part Catalog here, try find what are you looking for. thanks
I order this code D0409590 for NV-RAM on CTL Board and this Code 14077036 for EEPROM:AT24C128B-PU on BICU Board, as I know MPC2030 only used RPCS Driver Printer on standar one and PCL Driver Printer...
I know that, because i readed from manual book, but i didnt replace ctl board, i only replace nvram and eeprom with the new one