Hey all, I've got a machine keeps going out of whack on the color registration about once a month. It's a simple fix, I just go to sim 468 (color registration data) and scroll down to initialize and...
Type: Posts; User: Tom
Hey all, I've got a machine keeps going out of whack on the color registration about once a month. It's a simple fix, I just go to sim 468 (color registration data) and scroll down to initialize and...
KYO OEM - That may be some official textbook answer but I've seen that rogue print jobs cause that. Simple fix, usually just delete the job, unplug the machine for a few seconds and plug back in.
Does anyone know if the doc feed rollers for the M477 will fit on the inkjet pagewide pro M477? I have a customer that has a black and white copier under contract but also has a pagewide for color...
Hey, anyone run across a good rig or fix for those damn cheapass plastic feeders that the plastic breaks on with the doc feeder hinge? Bad enough they go out so often and cost so much, but...
Well, that is a 9 or 10 year office depot type machine now, might be time for an upgrade. I like the older ones also, the fusers last longer than the M477/479 so I get the reluctance but they aren't...
There are a couple cables available on Ebay for those models, but I don't think that's one of them. I always try to keep one for parts once the fuser goes out, the fusers don't last long like they...
No, that's not it. You can lean the cover beside it and block light and it still does it, plus I'm pretty sure HP doesn't have a light sensitivity sensor in there anyway that keeps the laser from...
Anyone know how to bypass when the side cover is off to get prints on the paper when the side cover is off? There's a microswitch on the board that the cover presses when it's on that I thought was...
I have one doing this, but the rollers aren't turning. On this model you can open the feed cover, all you have to do is press on the paper actuator so it thinks it has paper and you can watch the...
Hey, does anyone know if the transfer belt for the 8124cidn is interchangeable with it's predecessor the c8125? Yea, I know they have different part numbers, but that doesn't necessarily mean...
I have one of these in the field that sometimes won't come to ready. Last time I went I was finally able to get it to work, but not sure how. I had tried swapping formatter assys but that didn't...
I've seen a few lasers go out on Kyoceras over the decades, but they always gave a code. The more I think about it I think I've seen something similar a long time ago on either a printer or a fax...
I would normally say clean charge grid, but that is so faint it looks more like a fuser wear line from a sep claw that has worn the coating off (if it's coming out letter R)
I'm sure you checked...
5840458405 Anyone ever seen this before? First pic is a status page, second is a blank copy. Very intermittent, maybe once every 15-20 pages. Can happen from print, copy, or internal report....
Just an FYI, blades and charge rollers (aftermarket) are available on ebay through slow boat to china. They came out about a year ago, are significantly cheaper, and after plenty of use here are...
This is a horrible DF to work on if it has internal problems, count your blessings that it was a latch. They are definitely not made to be disassembled to the core, I tried it once for a difficult...
Is this thread still going? Hard to believe libs even have jobs, much less jobs that require talent and thinking. Ain't no Obamacare for copier techs, ain't no freebies for hard workers, ain't no...
Hmm, when I looked it up it said defective PWB or bad connection, or couldn't see that the bridge was there. But, it having the bridge with no finisher will cause the same code then that's an easy...
Hey all, I've been looking to buy some of these 3511i models with low meters and my wholesaler finally had some come in but they all have the finisher code 8990. That seems to have to do with the...
I just skipped to the end lol. Don't you people have facebook rants and raves pages in your cities for all this? I spend way too much time doing that where I live to do it on my favorite tech...
Fixed it, I had a spare parts machine and a few minutes before thanksgiving this morning to play with it. Since I was almost certain it happened due to firmware update, I bypassed swapping out the...
I'm not even clicking on this, but I agree with the sentiment. I live in a conservative southern town and admin the local R&R FB page for our town. I am a political junkie to the point my wife is...
It really depends upon the model machine. The older kyoceras seemed to do just fine with aftermarket such as the 2550, 3050 4050 5050 type machines. I upgraded so many of those to the 6525 MFP and...
The only thing good about these machines is the ability to get cheap aftermarket toners on ebay. Fusers are expensive, don't last long, and are a pain to change. Make sure to turn off automatic...
Ok, here's what happened. I ordered one of these printers that I love cause I don't care much for the current models, it had a low meter of 14k. Arrived in great condition, well packed. I fired...