Dear All,
Have a nice day
I recently purchase Canon PIXMA G1000 Color printer
It could be grate if you can advice the following
1.Common issues
2.What are the most importance...
Type: Posts; User: PA3040
Dear All,
Have a nice day
I recently purchase Canon PIXMA G1000 Color printer
It could be grate if you can advice the following
1.Common issues
2.What are the most importance...
teckat Grate Thanks for the reply
I look in to the both model Mother board and realized that both has same Mother board
Please advice
Dear All , Have a nice Day
I think it will not wast the time if we try some research to convert Canon LBP6030 convert to LBP6030w
Hoped both Mother board...
Dear All, Have a nice day!
Please advice a dedicated shop to buy Ricoh wide format parts around Singapore
Model Ricoh FW770
Item we need
Cleaning Blade
Developer
Charger Corona Wire
Dear All,
My Printer is displaying "Preparing Printer.... " Please advice to solve this issue
Thanks in advance
Hi
Firmware has been updated
Where can I find the Service manual
Thanks for the reply
I have two printers both are same model
In the first attempt I cleaned the pick up rollers and then i changed the feeding unit with other printer then I changed the feed...
Dear all
I have Lexmark S405 Interpret Priner
Isse
It display is showing Paper Jam!
I carefully checked it when I send the print its feed only one inch and get paper jam
as well as when...
Thanks again
Normally we configure with smb protocol for scan to folder
Thanks For the reply
Using FTP, can we able to send the doc to Folder of the User
Dear All,
Dose any one should have experience scan folder using Ricoh Dsm725 with Windows 8. As per the Ricoh official, it does not support with win8
Please advice
check the quenching lamp
What do you mean controller board is OK?
check the following
5803 Input Check
046 Fusing Unit Set Set (Bit1) Not set (Bit1)
For User code
User Tool > System Setting > Administration Tool > Address book management
1. Can you ON the exposure lamp using output of SP mode (5804)
2. Is it showing front door open alert?
If this is MP2001L relapse the op panel
Remove the drum unit and clean the wast toner recycle coil and check the around parts
Can please briefly explain the method used in house
This kind of issues most probably related to firmware. so you have to update new firmware
I think W240 is server base model for printing and scanning but W2400 is stranded USB and network printer and majority parts of both models are identical.
How about the copy volume per month
Grate
What is the SP mode number that you set for humidity set?
I faced the similar problem with MP5000 and what we did is, polished the drum then it worked for a week and it comes again ( only for morning )then I changed the Cleaning Blade then it worked for two...
Dear Eric
Can you please elaborate more on this
1.Stop the machine while printing by guessing that the paper mid of the transfer belt
2.Check the image on both drum and the paper
3.If the image on the drum more dark than the image on the paper,...