As long as you don't want them to jump - that might be a tad trickier.....
Type: Posts; User: bigwul
As long as you don't want them to jump - that might be a tad trickier.....
Only three times - I had to Google it to be sure!!!
To clear the codes - do the maintenance required and re-set them....simple.
You say you 'tried to do the preventative maintenance'...???
Just out of interest - what did you do?
Posting for help - then posting 'solved' often leaves people wondering.
What codes?
Those in the know bought cheap paper where I work - a whole pallet load of it - I got really really good at clearing jams and misfeeds!! - anyone want a basically unused pallet of 'cheap'...
A colleague felt the need to interrupt us with
"Did you hear that guy complaining about the ink in the copier machine needing replaced?"
"I didn't like his toner voice".....
<groan>
Google it - it's all there - even YouTube videos....
Are they not usually found in KFC?
I think Lauren Bacall said it best “You just put your lips together and blow”
Don't think she knew anything about 3, Cancel and Power Switches though....lol....
Did you find the cause though - even though no one seems to have been able to help - a lot of people benefit from some one finding the cause and reporting the solution....
Been there with the drawer - pulled hauled - pulled hauled - pushed - grunted - groaned veins popping out the side of the head and got generally embarrassed being unable to even open the drawer (It's...
As basically every response has been to check the FW and re-flash - have you tried to re-flash?
Unfortunately no - you will have to rely on the possible goodwill of some on here.........
You will need to get hold of the latest FW and re-flash to the HDD.
Depends on why it was deleted in the first place. Political correctness gone a bit too far - or some of the jokes gone WAY too far?
When he says loop - I think he means EYE LOUPE - magnifier so that you can check for repeat patterns.....not an adjustment loop.....just saying.....
Ooops - sorry I can't read!!!
...read his other post....attachment attached...
http://www.copytechnet.com/forums/hp/69254-hp-cm4540-mfp-transfer-kit-reset.html
I guess a Toner Cartridge would be a good place for a concealment!!!......the 'white powder' might be more valuable than the toner!!!....
This problem is not to be sniffed at.!!
Re: C2721
Code happens when the separator assembly next to the second transfer roller has a short or arc.
Check for good connection at the red wire to the separator. Use a pliers to squeeze the...
LOL - a scratched ass - more likely make your eyes water or go cross-eyed - not sure about the pupil thing!!
Get it now - unfortunately - it was funnier when I didn't understand it......
Search C449 on this forum - you will find additional suggestions. One of them being to check the connectors etc. for bent / broken pins.
Read the other posts....have you tried all they suggest?