Search:

We did contact Hytec.....they said it wasn't in their repertoire. I hadn't thought to see if there were other authorized Aquos dealers in our area. I'll check, but my optimism on this whole thing is...

Yes. We have the power supply out, but the numbering on it is nothing like a Sharp part number, and if you try to look it up by that number you get nothing. The Aquos side of Sharp will not give us a...

We have a PN-L651H Aquos Board that was warranty replaced. We were told to trash the old board. We thought it might be nice to hang on our wall here at the shop if we could fix it.
They seem to be...

Thanks for the input. We are going to start taking it apart today, so really appreciate the 'good luck'. Gave us a few things to check....hoping for a light problem since I only used warm water, a...

Hello all,

I just had this Z3200 brought in the shop for an 87.10 error. The tech replaced the belt in the field, but I have been trying to clean the encoder strip. There doesn't appear to be any...

Did you ever find a fix on this. We have one that throws the E7-11. It prints and faxes fine, but will shoot black copies through the DF and off the glass. Tech is currently going through changing...

Having a lot of jamming issues, seems to have some bent framework. The metal is so flimsy that any amount of torque can alter it. Possibly took a hit in shipping, but no evidence outwardly. Hoping to...

It actually comes standard on the machine. I went through the product support guide just in case, but they didn't even show the DF as an option.

Hey all......

We are trying to replace the DF3100 (D3B0) on an MPC4504EX. I found the parts catalog for the feeder, but there is no part number for the complete DF. Any chance anyone has had to...

Ellen was quick to display her contempt for the crappy bouquet and box of candy her husband Jerry had gotten her for her birthday.
She told him "Jerry....there better be something in the driveway...

We never did figure out what setting had been changed, but restoring everything to factory defaults seemed to take care of our issue.

We have an MX-4070N that has deteriorated in the six months it has been out. The copies are noticeably lighter, and the scans are, too. There are about 90K b&w and 25K color copies on the machine. To...

We tried from the bypass as well....the problem is exactly the same. We are running this on heavy 2 wherever we run it from, and have the same problem consistently. We have taken some of this paper...

Looking for help yet again.....

We have an MX-6500N that our customer is using to run business card stock. Paper is well within machine spec. When we run regular paper out of any tray...copier or...

Hey all,

Thanks for looking......got a salesman (there....washed my mouth out with soap) who put out a machine without all the accessories he needed.....imagine that!
We found out Ricoh does not...

For all those who took a look I appreciate the time and effort.....we got resolution.....the equipment has been deemed unsafe, and it is being replaced.

Hello all,

Is anyone else here as lucky as I am to be thrust into the world of mailing systems and inserters after 25 years of copiers?
I have a DRYK2 (dryer) mounted on a CNV6FLR (6 foot...

We are having the problem with the inner finishers as well. Our jams happen when the finisher exit doesn't lift up properly, and the sheets jam at the rear frame lead edge in the finisher. We were...

We had a Lexmark do this, and finally a network guy said maybe he could help. Turns out it has to do with Adobe updates.
Didn't think to try the corona cleaner.

This week we have had an outbreak of lines on print jobs. The lines start out at a spot varying from the start of the print to just a couple of inches from the end of the print. In most cases they...

Fortunately one of our network guys stumbled across what the customer had done before we had to reset everything. All is well again in sunny NW Florida.

Spanky is right. The customer finally admitted to trying to set up forwarding. We went to the web page and closed down the address and the forwarding, but we still have the same problem. We are...

Yes....there is still a 2300 out there. Up until two days ago everything was fine. Now the machine rings, performs the handshake, shows a data light, then comes up with "Selected Servers not found"....

Had the guide break on a fairly new MX-C33FU. Have searched the parts book for an MX-C301W as well as the IDNC site for bulletins or a newer parts guide, but cannot find an exploded parts list for...

Thanks for the ideas. We ended up replacing the HL Board (small board behind the PCU board) to get the problem taken care of.
I appreciate the time y'all took to help me out.