True, it has been discontinued but still avaliable!
NX is terrible unfortunately from my perspective, SDMA is a much faster and easier interface :)
Type: Posts; User: MCC-support
True, it has been discontinued but still avaliable!
NX is terrible unfortunately from my perspective, SDMA is a much faster and easier interface :)
I've been a big fan of the Ricoh app 'Smart device monitor for Admin'
Saves me HEAPS of time looking for machines of the network (for any brand) and pulling address book/User code data (on...
I am actually in the process of doing exactly that but instead of PrintAudit, it'll be FMAudit (same difference really).
As mentioned, they use ARM processors and the normal x86 platform app...
Smart Device Monitor for Admin is your best friend with moving address books on any Ricoh/Lanier device!
SSD. I had to replace 3 in 1 week after they all failed.
Was due to an issue with the firmware for the SSD and a flaw in the design. It was prone to failure if the machine lost power at any point...
Same as what BlackCat said.
This series of machine have a bulletin from KM about the SDD failing after the power has been turned off or cut.
There is special firmware and a new type SDD for it....
Slimslob is right.
SC899 is generally firmware. Although it can also be related to software error issues like bad drivers and dodgy HDD's. Do a HDD format in the machine first, update to latest...
Hi guys,
I have been working on a Xerox 510 Wide format. Just replaced the LED assembly and cleaned out all the dev drop around the mag roller.
Has been operating great for about a week but...
SF or DN model?
I've found the easiest way on both is to use the 'Smart device monitor for Client' (Downloadable on the Ricoh website in the driver section).
Connecting up to it via USB,...
I think that the 'TWN' listed is for Taiwan model machines rather than 'Twin'. As the 'EU/AA/CHN' stands for 'European/Australasian/Chinese'.
Just need to choose the one that matches your region,...
If you are referring to the MFD touch panel screen, press the 'Simplified display' button.
It will have the ability for embedded solutions however there is no word on whether the VM is on a card or embedded (Given the size and that it has PS3 embedded as standard, I would take a guess to...
Check the fuser first. Common issue with this series of machine.
The issue with Windows 10 specifically with scan to folder is that the SMB protocol version has been increased from v1 to v2/3.
Unfortunately, this increase in security stops the use of many of...
When you say manually, do you mean manually feeding the single side output back into the tray or as in double siding using the platen glass?
If the shadowing is happening when using the ADF and...
Checked our 3rd party parts supplier manuals. Looks like you can only get the drums in the kit form. As far as I can see there is no breakdown for these parts.
Manufacturer only supplies the kit...
Your suspicions were correct as always BC! (As much as I wish they weren't in this case :p )
I have been moving up the chain of Kyocera and have managed to find someone familiar with this setup....
The machine locks down functions of the machine if there are recurring issues in that part.
May have been multiple jams in the ADF and the machine has locked it.
Run U906 and powercycle the...
As far as I know, the only one of those models with a Single pass document feeder was the MPC5503SP.
The MPC4501 and MPC5502 both used ARDF units.
Just checked rapnet as well as they only have...
Sometimes the simple answers are the right ones haha.
I'll give it a shot and see if it allows the stapling. Keep you up to date!
Update the firmware first.
Do an NVR backup on to an SD and then a Memory clear. Then try scanning again.
If it is still bad, most likely the CIS unit has failed.
Reupload the NVR data once...
Newer machines will work fine with a 16gb as long as they are formatted correctly.
Older series may not play as nice with SD cards of that size. The ideal size is a 512mb but as stated, a 1gb...
Yeah, carbon copy days are certainly gone, more just reading out what the option is on the driver. I can use two ways to make a copy of the print job in question. First, by changing the print...
Hi guys,
I see there are a few PreScribe gurus among you.
Unfortunately, it was a bit before my time starting and they have swept it under the carpet. Saying that, I think it may be my only...
Check the paper end sensor is sitting properly. If the flag is dislodged, it can cause this sort of issue.