Try unchecking the auto configuration by ip address in the settings tab of the printer properties the manual add the deck.
Type: Posts; User: hinbox
Try unchecking the auto configuration by ip address in the settings tab of the printer properties the manual add the deck.
Spray white lithium helps but once they start replacement then spray white lithium. Good Luck
That is def. corona wires try replacing or clean with alcohol and microfiber towel. Blue paper towels might make it worse.
Check your bushings in fuser rollers also.
If you only want black and white capabilities use the 754 diver instead of the c754.
go to service mode, copier, option. change pd to 2 i think thats for letter
you can go to special features and choose negative to do sky shots with the lid closed or put white paper on glass
32 years my car had just got stolen and they had company cars and two gas cards. add to that no drug test.
where do i sign.:p
canon color-t drum weight--60lbs analog color copier made in late 60s early 70s
try cleaning lazer window to the left of drum unit
Flashing machine with latest version of software if available
yes he is right about the pads you can use velcro felt if you dont have pads available
before you buy a new controller,try reinstalling system software first.
hi am looking for 250 firmware any help
is it new $75
The answer depends on who's servicing, even a new machine can have problems. 10 years ago i would say canon without a doubt.No longer!!! Bamboo under the nails. km sorry canon get your sheet...
do you have account counter on if so check printing perm in admin functions need to set to allow
40g barracuda drives you will need system software to partition. first single partition then you can partition other two for the 105 and 8500 only
pull out you itb cleaner blade and check for buildup of waste toner also problem could be in the itb assy and not the belt if not fuser.
you may also need to load system software with the bootrom,you dont need more ram. I would try to have the software when you install the bootrom. Most time bootrom alone will not print.
After installing the bootrom you may still have to flash the machine with system software, until then the jobs may leave queue but never print
you do need the bootrom but not more ram
m
if you remove battery from inside fiery and short battery leads will temp cure ff. you prob need new battery