https://youtu.be/_DCHhm7c_ZM
but it still need a pass code to reset, if you find samething tell please
Type: Posts; User: eliaso
https://youtu.be/_DCHhm7c_ZM
but it still need a pass code to reset, if you find samething tell please
menu # 1934 menu
I found the solution
it need to change the resistance 56 ohm on the drum unit
hello, I did not found how to go to thech mode
hello
I have service call 14 on a magic color konica minolta 2550
thanks in advance
Hello brother
not all believe in simplicity
mix them and you will see the different , do it ,and we will talk
try this
small garlic with a drops of vinegar and drops olive oil
the problem came back again
I am sorry
hello
I pull out the metal of the HV from cartridge where the spring of the charge roller contact it, (the side of the black bouching ) and I clean it place
, and twist it with a Teflon tape . it...
yes it's a 51A HP laserjet , the other cartridge work well
I am from Lebanon
hello.
i have this black lines , they change there place .
thanks in advance
dirty scanner make a light copies not this line
thanks .
I will try it
hello
I have this horizontal line
all cartridge are good , without this line on all the four cartridges ( drums )
thanks for help .
32571
this sc code flash on the screen of the copier and not from my mind
I clean the laser head and the optical, they was so dirty, for now it work
31896
thanks friend that you trust me!!!!!!!!!!!!!!!!http://www.copytechnet.com/forums/images/icons/icon9.pnghttp://www.copytechnet.com/forums/images/icons/icon9.png you took out my 4 points ,I am not...
hello
I have this code on Gestegner aficio 1802
sc 149
thx in advance for help .
hello
I named separation gear, the two black gear without teeth, and maybe they touch the drum,that is why I named separation gear.
hello
the problem began when the left black31533 bushing was broken, I fixed it
if you stay in front of the left door and you open it, the transfer roller will be down, at the left you see the...
Hi
the problem is solved, it was so easy, the separation black gear on the right side wasn't in it's place .
It's the first time I see this copier, nice engineering .
thanks for all .
all are in places and the stopper of thetransfer roller assembly is switched corect in it's place
Without the transfer roller assembly the door closes properly
without the transfer roller assembly the door closes properly ,when I put the transfer roller, the right side of it doesn't come in it's place ,it must be shifted about 4 mm to the right .
thanks.