Search:

hello

please am still waiting for help on the firmware or sst ver 4.72

cheers

Its so true

thanks sir

yes sir the firmware.
the machines boots and will indicate harddisk faulty halfway through.

no error code reported yet. will site tomorrow

thanks

hi sir

please i need this version of sst very urgently. please is it possible to get a copy. i need for IR6275i

thanks

hi teckat

truly the laser unit was not seated properly. i corrected it but still the error E061-0005 comes on after some seconds into auto gredation

any more i deas. i cleaned the mirrors

...

thanks i will check and update you. much appreciated

Hi all

there was a spill of cyan toner in the machine. We cleaned it up. Now before gradation is completed the e061-0005 comes up.

What i have done so far

is i have change the pre...

Thanks sir
I wil go back check it and update U.

The machine came without a pedestal. Can that be the problem?
and also where can you locate the 2-way unit driver pcb

Thanks once again

Thanks sir
I removed all the locks and also installed the power supply
Now the bin moved up and didn't move down. And the machine will show the error E 000716

and also want to find out if the...

Hi
Am installing a new copier canon ir 2530 after switching on the machine shows e 000716
Av check all cables. Any ideas
Thanks

mrfixit51 thanks for the insight.
i'll give it a shot

hi fixthecopier

please i need this service manual badly and i would appreciate it if you can send me a copy will email: deoarhin@yahoo.com

thanks

i have this problem with 4700n. the machine does not initialize, memory test stops at 128
any help?

hi AC.skywalker, i am also looking for fomatter, could you please link up to buy one?

Please cableties what is LMS
thanks

thanks guys.....yae i wanted to move the bootrom from 3570 to 3245 to make it printer and scanner. and could you please tell me where to get the network printer kit for ir3245?
thanks

and please if your not sure get a tech's support
gud luk

hi all
i want to know if bootrom ntype for 3570 will for ir3245
thanks

please do you have photos ......i am interested

email:papakarhin@gmail.com

Hi
Check the gears if all is right
change the ETB
good luck

Hi all
This develop ineo750 same as bizhub 750 with error code c-4707
the manual says the abnormal part is one of the ff:

write unit
ipb (image processing board)
scb (system control board)...

thank you... i am currently doing it with my laptop but sometimes it becomes boring. i think i'll try the ipaq series.

i know of bizhub 750 and runs good

have you also checked the user settings on cassette eligibility? it can be off

Does it occur before fixing if not manually adjust the fixing rollers tension. thanks