I must add some comments on your method and let our Tech folks know that your Re-work method is much better than others, I recently did KM C368 with Same Issue, the machine condition looked like...
Type: Posts; User: peterxu256
I must add some comments on your method and let our Tech folks know that your Re-work method is much better than others, I recently did KM C368 with Same Issue, the machine condition looked like...
HOW ABOUT ASK chatGPT4 TO WRITE A BOOK ABOUT THE SC672? IS IT POSSIBLE TO DO THAT? THINKING OF OUR PRINTER INDUSTRY MERGED INTO OpenAI TECHNOLOGY
Two Different Board at all. do not try it. not logical to be able to update firmware while the Error code pop up, no communication at all.
Deeply want to know if you recovered the MPC306 through Manually updating or Automatically one. some hints are appreciated. Because I found Nic card's two lights flashing all times in spite of...
Working on the code (SC-672-00) on my C4504 for a couple of weeks, still not solving the problem...
the Service Control Board (D238 5662 for C4504, and D238 5663 for C5504) are very expensive to be...
Working on same issue for exact model..
First want to consult with Tech Head about USB cable, printer’s USB cable TYPE : USB Micro B Male to USB Micro B Male (I don’t have OEM part #), I had very...
Thanks for good suggestions: Changing IP address and host name are better solution than Fully removing the Connector APP which is good to register Other printers. Whatever it is Android or iMac OSx...
The Connector APP always pop up Error Message : Failed to find the machine. please refer to Troubleshooting in the user manual, Then check your network"
The Testing lab showing strange result:...
Enclosed is the log file from the Connector for some advanced Tech Head review.
Error message pop up while connecting a new printer Sp C440DN via IP address.
Which side, from the printer or the...
Connector app unable to find the printer (MP201) showing Error message:
See attachment of screenshot:
question: the mp201 was previously registered by app via IP address Running well, even...
Looking for aftermarket supply for Ricoh MPC305/c306/c307 Drum's Clean Lubricant Bar and Charger Roller's clean Sponge Roller
Your reply doesn’t make sense, don’t mislead ordinary guys, double think before posting.
Hay Man, this is something that I want to hear your explanation ( At least I understand your BASIC understanding. the theory you said Need An optional wifi Card installing. What is true or not, at...
No sop such kind concept. just common as regular wifi connection, input the SAME password as computers and phones did.
As originated from a Cisco Certified CCNA technician, I could not help myself posting this strange issue, the Ricoh MP C2004 wireless connection pick up a wrong IP address in a different subnet...
Yes, It was indeed wrong motor. Feeling shameful. see the photo below that it was hard to be found since Part catalogue didn't indicate clearly, Problem exact same as that RTB Bulletin Thanks for...
Hi Mga, see the resize photo, the motor has 8 wires is correct one or not AX060460 marked on the part 42652
Resize the attachment of the motor photo. it is indeed mounted at rear side , Part # clearly says AX060460
42651
Failed to att@ch the photos. My motor just from the machine, have 8 wire connector, don't know why.
Thanks the bulletin, the photo taken recently from MPC8002, and motor 8 wires connector. the bulletin see the motor has 2 wires connector.
want to know what's difference. Thanks
I agreed you those are two separate issues; a) ce20, b) 08 test mode input. a) is relevant to hardware(component,sensors) issue, b) is pretty relative to software(firmware issue)
Recently I met...
Agreed to use the term " Ghost Jam", recently working on vintage bizhub 200/250 series. Changing the Feed Roller Assy, even main motor at back and tray lift motor Assy in rear tray. the problem...
A very good suggestion to all users and techs. most of commercial printers(floor model) from small business are located at tiny space, needless to say ventilation, users are sitting beside often( no...
That's correct.
A good question, first stage Toner almost end with flash light. Supposed to allow 50pages, but actually not. Just a few pages then went to the second stage Add Toner to disable printing. No current...