I need access to a service manual for a Xerox 700
Never thought i would mess with a machine that old again, so cleared all my Xerox stuff a couple of months ago :(
Anyone willing to share?
Type: Posts; User: mc8305
I need access to a service manual for a Xerox 700
Never thought i would mess with a machine that old again, so cleared all my Xerox stuff a couple of months ago :(
Anyone willing to share?
Second error on this "new" install :)
On start up the PerfectBinder B1 gives us code: E5B2-0004-61
Abnormal adjustment value of the level thermistor (S58) has been detected
Any hints?
Where...
Thanks to both fchu5959 and Teckat for excellent advice!
It ended up being the j7969 connector I apparently didn't check it properly the first time... now pushed all the way in and POD deck online...
New Update:
Tried to swap all drawer related prints between the lower and middle drawer to see if the error code moved.. Nothing changed. :(
Connected another POD-A1 paper deck and got the same...
Thanks!
Checked all connections, but found no problems, still the same :(
Any other hints before i start to swap prints?
As subject says. We mostly deal with Xerox and KM kit these days, so i need a little help with this Canon issue.
New machine to us, decommisioned by Canon, was working at previous location!
When...
You guys are correct.. Did overlook the 2 blue screws at the back.
Strange, no info on the box instruction and nothing in my service manual..
The old unit must be a gen 1 it dosen't have this...
Just replaced the secondary transfer assembly with a genuine new KM unit..
now the machine soils the back side of the sheet with no apparent pattern.. it can be ok for 20 sheets - the 10 bad sheets...
The answer for this one is enter: DARUDE SANDSTORM in the service menu, and then hit the green button. :p
It ended up being the main unit lower fusing belt/assy
Sure hope it holds up longer than the 450.000 imps it is rated at?
The price was 1500 USD!
New to us Press C8000, we only experience this issue with 170gsm silk paper. (see picture 170gsm on right 350 gsm on the left)
On 300 and 350 gsm silk and other paper surfaces we don't get it at...
Hi folks,
I am a Canon/fiery guy that just got a hold on a Xerox Docucoler 250 with a FreeFlow Server 6.0.
I am totally clueless regarding the freeflow server, and the documentation is not of...