Hi All
I have a Develop +25 giving me an unusual problem when printing a multipage document
If the document is printed in colour not greyscale single sided it is fine, however if the document...
Type: Posts; User: sharkie
Hi All
I have a Develop +25 giving me an unusual problem when printing a multipage document
If the document is printed in colour not greyscale single sided it is fine, however if the document...
Hi Darren could you tell me does this firmware actually stop the replace IU message from being displayed or does it just allow the machine to continue to run once the units have reached their life?...
Many years ago the company I was working for had the contract at RAF Brize Norton airbase, one of our engineers was sent to attend a couple of machines. After repairing the first he made his way over...
Already tried this fix it lasted all of about a week :(
I have a MPC2500 with an ongoing issue where the machine when used in colour mode after say 50 copies it displays the message out of toner. If you switch the machine off and on again it displays the...
I was asked the question by a trade copier dealer so can only assume they have some dodgy reason for wanting to change it.
Ricoh direct engineers are instructed to fit black units to replace colour units in the field so double standards from Ricoh
Does anyone know if it is possible to change the serial number on these machines without the machine flagging an error code of serial number mismatch?? :o
Turns out the problem was that there (WINS) licence: Whatever that is?? had expired and because they had flow control enabled on the network card it was not enabling the copier to scan. They turned...
We have several 3245c models out with the same recurring fault.
After replacing the fuser belt within a couple of weeks the coating on the fuser belt seems to be separating and causing the surface...
I have a MP4000 which has been happily scanning to folder on a windows 2003 server for the last 9 months. Last week it stopped scanning. I am able to scan to any other PC on the network but not the...
We still look after a couple of FT4418's, FT4015' and even one Nashua 7125 or Ricoh 4480 analog. Still got half a dozen aficio 200/250's as well. We recently condemned our last Nashua 7112.
Looks like charge grid to me.
As I understand it you are not sure where you need to input this information into the copier? Enter user tools,system settings,then file transfer tab and this is where you need to set the scan to...
Sure have but usually the give away is raised print
We rebuild the units in the field, they take a while first time but once practiced we can do a rebuild in about half an hour but I suggest replacing the fuser belt and sponge hot roller as a pair....
I have seen something similar to this on a couple of 1045's and it was caused by a dirty polygon mirror with a slight hazy residue to it . A gentle wash with alcohol and a very soft optics cloth...
Received and fitted a new system SD card today and installed both copy/system and engine firmware similtaneously and it sorted the problem.
Thanks for the advice,its a shame Ricoh don't mention this...
We have had a busted fuser lamp and Ricoh had no stock and we had to wait almost 4 weeks before we received a replacement.
We had a very happy customer as you can imagine.
You could always try adjusting sp7905-14 and specify the number of sheets to trigger when the oil near end condition is reached.
22 years and counting. There must be a better way of making a living??
You will need to enter service program mode by pressing in order. clear modes key then 143 then press and hold down the cancel key. this will give you access to the sp to change the serial number....
I have just updated all firmware groups on a MP1100 each group has loaded successfully, the last group to update was the system/copy. The display confirmed the update was successful I switched the...
Utax 252