was this issue ever resolved?
Type: Posts; User: mlandry71
was this issue ever resolved?
If anyone has a stuck door on a PB3220, I have a solution to prevent the door hooks from over rotating and getting stuck under the pins on the feeder frame again.
I found that you can carefully...
MPC5503 with SPDF D683 with the latest firmware on machine and feeder will almost consistently display a jam after the last page is fed and a blank page is detected.
This was intermittent before...
Holy smokes I can't believe that worked! 107107 was the new code. Changed it back. Phew. Thank you!
...I knew it was a BAD IDEA as soon as I saw SP 5081 on the newer models.
Picked up a Ricoh mpc3003 from wholesaler today. Well, someone must've changed the SP entry code and now I can't get into...
This week we've been getting calls from all over the state and even across lines that scans to email are all suddenly going into SPAM.
We initially thought it was just to gmail addresses, but now...
Sorry to sound dismissive. I do thank you very much for providing evidence of this defect.
I'm just trying to build as big of a case as possible so someone at Ricoh might take notice.
In fact,...
Just some additional research findings...
I think I've found a factory defect because i just got a machine in from wholesale with only 17k total and 9.5k of that is color with the dark line in the...
Thanks! How did I miss that one?
For reference (from spc440 parts man):
M0662015 PCU:C:SUPPLY:ASS'Y
M0662016 PCU:M:SUPPLY:ASS'Y
M0662017 PCU:Y:SUPPLY:ASS'Y
Doesn't look like many of the...
Well, thank you all for the suggestions.
While it does look like a dirty charge roll, this happens even on brand new, oem, just-out-of-the-box pcu's (they are combo drum/dev units that are cru's),...
This is too much of a coincidence. I have to see if someone here has the same issue...:confused:
Client has Ricoh SPC440 with under 50k pages, purchased new last year.
Client printing sunset...
Apologies all around. Guess I just got used to finding relevant info in old threads since I mostly work on the older models.
So that goes to show why I had no other choice for my issue. Someone must've switched sd cards and I couldn't remove all the installed apps.
just putting this here in case someone comes across this...
Had the message "sd card not seated correctly..." which would NOT go away even after full hdd format, removed all java apps (then...
Been searching for anyone still having any of these in stock. Keep hitting the "discontinued" wall.
I KNOW it's discontinued, but i still need one! SOMEbody's gotta still have one on the shelf -...
So, has replacing the registration clutch solved this code?
The reason I ask is that I have a client with a MP2501sp with this SC520.
I have cheated the door and while manually turning the...
Check TSB129. There have been at least 6 modifications/part updates of the exit/inverter unit. Some major changes to roller widths, guides and mylars.
Modifications applied to the Exit Unit...
Found some other earlier models have "Area Selection" on factory SP mode (clear 143 stop stop) SP5807 (=2 for N.A.)
Worked here too on an mpc4000. Be aware this clears your service phone numbers in SP5812, but no big deal to re-input.
Thank you! :cool:
from ADF or directly on scan glass? If only from the glass, I would say the lid is warped or not seating properly. if ADF,... you got me there.
Here's what I found...
SP7804 works on the 301's
for the 161/171/201's use SP5912 and set the alarm interval to 0 (disabled)
for the 1515, also use SP5912 but set to 1 (do not display)
...
this is a corrupt print job clear all the print jobs from the computers unplug the cat five cable and reboot the machine
Searched for hours and still no luck. Most instructions refer to "Command Center RX" which this machine (apparently) does not have.
Anyway, I am trying to refurb this machine but cannot find where...