Search:

How do I reset this? Do I need to replace with new assy.?
what tells the machine I put a new one in?
tried a used one from working another working machine didn't work
Tried to reset life in...

I like to use a thumb drive with indicator LeD
if light stays solid at start of alt boot suspect bad HDD
if not reseat everything on main PWB in the tray and redo alt boot procedure

Issue resolved ! it was a bad transfer belt Assembly apparently the cleaner blade jammed or flipped and the belt and stop belt from moving we were able to correct and use existing but will replace...

Acts like fuser not turning , replaced fuser no change , tested exit jam switch , works.
Dell manual flown chart says replace printer ???
cheated door and fuser is turning.
paper jams on side...

Your Scorch Eliminator is depleted and needs to be refreshed/recharged it's not the toner
I have a pallet of these I can sell you cheap current part number 911H2004UO located outside a small...

Check the jam switches remove toner cart remove adf , remove tray 1 completly flip mfp on its back remove paper level plate assy one screw on right look for broken jam switches or paper jam on small...

Hello all,
How does one adjust image position on this Model MFP WC 3655. EDOCS say its in dc 131 but I don't see it there specifically.
I tried changing what I thought it was but no movement of...

for starters always upgrade on this model latest approved firmware avail to general public on xerox site. its not hard to load thee is a procedure for rplcing HDD but you should be ok when putting...

I couldn't find much good to say about this model. what is the real story I never worked on one. A customer offered me a working one for free.
any input appreciated .
Hoppy Easter
Billy

I ordered the ears and the PWB I think sensor is OK

Going back today I will check

Happens just after cycle up after power on. If I leave front door open it still faults out. ?Never says close front door first. Its like it thinks door switch is made but its not. SW in 3-1 are set...

I just got on service about 50 Models UF-595-6000 (mostly 6000) of these and am charging by click. Have any of you ever used remote diagnostics to retrive the meters? I found some info on it "see...

You don't know till you try let us know I would say no but.....Thinking doing outside the Box is fun

AB dick K627 AKA Xerox 1065 5065 5365 cleaning blade for a photoreceptor belt WTF were they thinking!!!!!??? and a plastic type housing for fusing rollers that had oil sump resting in it that would...

I find I go though a lot of shoes in this biz. Soles come separated or cracked. Tops get scuffed. Laces don't last for %hiT , insoles just plain wear out or go limp or no cushion. Have any of you...

Xerox POLISH No, OEM Number:043P00069 Alternate Part # 43P69
I ordered some about a year ago I think its still available
Electrictoner

If you send me some hinge cores I will rebuild them for you for $120.00 US plus shipping
I have perfected this process over time and can do IR 550 600 8500 105 series A whole cheaper than Canon ...

I am now in need of 1-2 IR 105 with no more than 7 million clicks. Can be basic finisher (K1) or bettor OK as long as it doesn't effect cost much. Has to pass Paper and most panel OK not damaged....

My Canon IR105+ has a maximum of 16.000.000 copies and still now has just only 1.084.000 copies).
THIS IS ONLY WHAT I THINK!
16,000,000 Were you get this info never seen in Canon document if you...

Found M3 still need 7105 PWBS
set of PWBs for 7105 controller box pn on Boards FM2-5430 and FM2-5434
Send info and price
Billy

Don't have that log history and since Tosh are not my usual cup of tea as they say I think i will pass these up
Billy

I don't usually work on these Machines but a couple of techs told me after 1 million clicks Forget about em. Reason asking
I have opportunity to get 4 at a cheap price with about 1..2 mil on them....

I need
1 M3 Fiery controller
set of PWBs for 7105 controller box pn on Boards FM2-5430 and FM2-5434
>>@@>>intocopy@yahoo.com<<<<<
I am not end user need for resell so send me realistic $$...

So this is a saddle stitch booklet? so this happens from tray 3?4? did you look at the parts on the feed head levers ,springs, clutch dirty ? there is an busing that gets dirty too in these...