Search:

i dont have a part manual for this model but i use this site as it shows the parts try it out
http:\\Printer Toner Cartridges - Copier Toner Cartridges - Printer Parts & Copier Parts i look for the...

must be a tech with the comment of you spend any more time here you will have to come to the christmas party or the worst one your here so often we will have to get you an office of your own

hi you are going to have to bite the bullet and clean the mag rollers and re dev the unit it looks like the dev is spent

i agree with a lot of the comments about this machine but i cant judge on anothers company service record but has your machine had the 500k regular pm done also has the machine been fitted with the...

have you done the 906 reset

have you tried putting the old ones back in to see if the error code goes km are very funny when it come to putting other brands in the machine if you dont get the error with the old ones then you...

have you tried cleaning the front of the laser unit dust and dirt will cause faint copies

hi was wondering what the temp is set on the fuser for first sheet copy you can get the temp display in sp mode and have you changed the thermistors they are always giving out funny readings

hi i thought i would just drop a line to see what you are offering at the moment i am looking after a large company in the uk where i look after all there hp epson printers and all there ricoh and km...

what state is the transfer is it covered in muck

try cleaning the slit glass infront of the laser unit they are forever getting dirty and causing the copy quality to be washed out

you need to set the print settings and the copier settings to the same the machine will over rule the fiery

print of the meter reading if you have an image then your not putting the orginals the right way

i would be looking at the dev unit first its most likely to be the mag rollers

i had a problem with the same machine it turned out that someone had been playing with the settings and changed the suply from sensor controled to pixel just check that first as i put new pumps in...

had a few of these machines with pale copies turn out to be the transfer roller it was covered in toner and not putting out the full voltage start there first

yes to both

i only had one problem with these machines and the lines in the drum it turn out not to be the drum it was the white reference plate with these machines they do a quick reference check before they do...

the 395 is a c code and relates to delelopment output abnormal.a development bias leak signal is detected high voltage to the dev unit which eceeded the upper limit
try seeing what state your mag...

have you set up the control panel in the service mode it is under the alignment

you can set the machine up to defult to a certain tray and turn of the like for like setting turn that to auto

no you cant the 351 is a mf22 machine and the 352 is a mf 30 machine to different toners

a scottie for 20 years on every copier manufacture and printers to

is the appletalk turned on

you cant ban for giving out how to get into the service mode.you should be banned for reseting meter counter though it causes no end of problems.our company often give the users the service mode to...