Search:

Type: Posts; User: MunsterTech

Page 1 of 15 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    380

    [Misc] ricoh IMc2000

    Hi

    We have a customer with the above machine, the IT guy has left and nobody can get in to
    change the network settings due to administrator password. Is there anything in SP mode to clear it?...
  2. Replies
    1
    Views
    504

    [Error Code] Iradvc5550 (3 series) E064-1200

    Hi,

    Had a quick look at a 5550 today with error code E064-1200, magenta issue AC voltage and
    . Firmware is latest version, machine about 4 yrs old and hasn't alot of work, approx 300k....
  3. Replies
    10
    Views
    1,046

    [Error Code] Re: iradvc5235 - E075-002

    Sorry, don't have the original drum, this was passed over to me from another tech. I'll have another look soon. Tks for the help
  4. Replies
    10
    Views
    1,046

    [Error Code] Re: iradvc5235 - E075-002

    Yes, the error is cleared, the machine on reboot tries to go in rotation, cassette lifters start to lift, then goes into error.
    the ITB motor doesn't turn, a different ITB assy does the same.
  5. Replies
    10
    Views
    1,046

    [Error Code] Re: iradvc5235 - E075-002

    No, it goes straight into error state, the itb motor doesn't turn at all. Replaced the whole itb assy
    and same issue, dc controller replaced, still same issue.
  6. Replies
    10
    Views
    1,046

    [Error Code] Re: iradvc5235 - E075-002

    Hi

    The itb assy has been replaced with another and also the DC controller has been replaced, still has the error E075-002.
  7. Replies
    10
    Views
    1,046

    [Error Code] iradvc5235 - E075-002

    Hi,

    Was passed this by another tech. Initially it was magenta marks on copies, he replaced the mag drum,
    but the machine went into E075-002. He checked the ITB and thought it was OK, he replaced...
  8. [Error Code] Re: Iradvc5840i DX - E0732, E074/E073 and loud noise

    Hi

    Looks as if it is main controller, drum drive pcb replaced but main drive motors still whirring away like mad.
    I cleared the DC and the main drive motors stopped whizzing around, however the...
  9. Replies
    5
    Views
    1,239

    Re: IR Adv C3525i- repeating image

    Looks like the dev assy, you can wipe the mag roller which will get rid of that but usually comes back.
    Best to replace the dev
  10. [Error Code] Re: Canon C5240a Close Front Cover Error. Please help.

    Had this once on a 5030, long time back, would work away then suddenly close front door, side door etc. Ended up being the power supply!
  11. [Error Code] Iradvc5840i DX - E0732, E074/E073 and loud noise

    Hi,

    Couldn't find my original post on this model. Initially had E0732 and E074 and extremely loud noise which
    turned out to be the main drive. Canon remedy advised changing main drive, which was...
  12. Replies
    15
    Views
    2,691

    [CQ] Re: Canon c5235 Registration

    Is the patch sensor shutter actually moving? The solenoid actuates but the shutter can stick
    due to the plastic nipple breaking off.
  13. Replies
    3
    Views
    555

    Re: Canon 5500 series ID Pins

    Think you have to turn it on through the RUI first,
  14. Replies
    1
    Views
    307

    [Misc] Booklet fin W1 Pro

    Hi,

    Have the above finisher on a VP115, just shy of a million clicks. When stapling on top left corner intermittently and usually the last sheet it will misaligne the
    Last sheet, but still...
  15. Replies
    0
    Views
    341

    [Misc] Iradv DXc5840i Fax issue

    Hi

    Brand new 5840dx with a AX1 fax kit. The machine has uniflow installed and everything works perfectly except the fax. The machine recognises the fax is installed, country type is correct etc....
  16. Replies
    0
    Views
    215

    [Misc] pro-4100 constant cleaning

    Hi

    Went to this non contract pro4100 LFP, customer reports that it constantly cleans, thus using inks and maintenance cartridges. Noticed that the purge unit wasn't locking in the head, replaced...
  17. [Dead] Re: DX 5271F Flashes green no screen then warning light beeps than it powers down

    Hi,

    If you check the service manual there should be a flow chart telling you the fault. I've had this several times on iradc257 turned out to be power supply
  18. Replies
    2
    Views
    644

    [Annoying] Mobile phone tracking - GDPR Europe

    Hi,

    we currently use Remote Tech via a web browser. Our company has informed us that this system is being pulled by the Remote Tech company and will now be used as via an App version which now...
  19. Replies
    6
    Views
    1,008

    [CQ] image faults - distance between faults

    hi,

    have a new tech just started with us, I used to have a sheet with image fault measurements on for re-occurring marks and the distance between them in mm for drums, transfer roller, charge...
  20. Replies
    4
    Views
    429

    [CQ] Re: iradvc3530 poor quality

    it has been replaced
  21. Replies
    4
    Views
    429

    [CQ] Re: iradvc3530 poor quality

    hi,

    sorry, should have said in my original post, image on ITB is weak too, very poor quality.
  22. Replies
    4
    Views
    429

    [CQ] iradvc3530 poor quality

    Hi

    I've an Iradvc3530, looks like a poor transfer issue. Previous tech replaced ITB and secondary transfer roller. No change. Now laser, Pri and secondary HVT pcbs, DC controller, right hand...
  23. Replies
    2
    Views
    622

    [Error Code] Re: Canon irc 5030 error

    check the coupling on the cyan dev assy if that is driving the mag roller ok, then take out the ITB assy and process assy that houses the drums, look in to the cyan hopper and see if there is a seal...
  24. Replies
    7
    Views
    2,118

    [Error Code] Re: IRADVC256 - E074 -002

    hi guys,

    thanks for all the responses, luckily enough, had a scrap machine available, so took the main drive out, replaced it in the machine with the E074 and now working away like a good un!
    ...
  25. Replies
    7
    Views
    2,118

    [Error Code] Re: IRADVC256 - E074 -002

    Says the the call was logged for the E074
Results 1 to 25 of 373
Page 1 of 15 1 2 3 4