Hi All! I am running an RP3700, and I have a problem with one of my drums.
It was working fine, then I inserted a new ink colour, and now it seems to be running dry. The ink doesn't seem to...
Type: Posts; User: benjaminography
Hi All! I am running an RP3700, and I have a problem with one of my drums.
It was working fine, then I inserted a new ink colour, and now it seems to be running dry. The ink doesn't seem to...
Help!
The screen on my Rp3700 seems to have died. It is vaguely illuminated (darker blue) - but not displaying anything. I can attempt to press buttons and it bleeps (and things happen!)
38620...
Just some feedback regarding master disposal belts - I hope this might help some people out (especially as consumable parts become scarce)
I've just had some success replacing the smaller disposal...
I never realsied that! If I ran non-HD masters with HD black, would it not be compatible, or just produce a lower quality output?
Hello!
Some questions regarding RISO masters, any help would be much appreciated!
I have an RP3700. What is the difference between HD and non-HD master roll? I'd assume the quality of the print...
Blimey OK - I'll have a closer look at the other RPs and see where the replacement bands should be fitted.
I bought the machine with the best of intentions to print my own work - maybe I should...
Hello! HELP!
This has been an ongoing problem for a while, but has reached a critical point where our RP3700 is now unusable.
Just for some context - I use the machine with a friend once every...
Just solved it somehow - I managed to get the drum out - it was half rotated which must have caused some problems. Master Disposal tray went back in after this.
Weird!:p
I have just been into test mode to manually eject the drum - and it won't come out either - incase that is connected?
Hello! The Master Disposal Tray won't fit back in the machine! I insert it, but it seems like something is blocking it.
To add some context, I have an RP3700 - I just acquired a new drum from...
Hi VENRISO - thanks for replying so promptly - I had to leave the machine for a few days, so have only just had chance to check it.
Upon removing the plastic grey plate - I noticed that the two...
I have since been into test mode and have attempted to run a printing cycle (after manually bringing paper to the feeders - hoping it would work) - and I get error message t02-405
Hello!
Just had an error on my RP3700 - t02-401.
When the paper feeds the tray rises - and doesn't stop.
The machine has been working really well all day. Immediately before it broke I was...
An open question to the community - what is RISO ink made from, and can it be substituted with alternative inks (ie oil based screenprinting ink)?
I was wondering if some sort of screen printing...
Hello - just an inquiry about ink colours
I stumbled upon this ebay page, and there are alot of colours I have never seen before by this seller-
Riso Risograph SKY BLUE 36K Type RP Color Drum...
Hey Everyone - sorry for the lack of updates - I only just last night attempted the drum fix (its surprisingly hard to get an extra pair of hands sometimes!).
Anyway - it totally worked! I applied...
Hello! Tried CONFIDENTIAL MODE - but the same problems are still happening.:(
Hey Everyone - busy few days, I've only just managed to get some time with the machine.
OK. A new weird development.
I reset the machine (switched it off/on whilst holding the yellow rest...
Double and triple checked the drums. Found the odd tiny scrap of master under the various flaps, but they are totally master free now, and the black strips are clear.
Are there any particular...
Thanks for the replies everyone!
I've been away from the machine until this evening, so tried a few things -
Cleaned the sensor with a cloth (even removed it from the metal panel at the top of...
Thanks for the reply!:)
To reset I switched the machine on and off holding the yellow reset button.
Just turning it on and off took me to a 'press start to resume' (or something like that)...
Hello!
I am having some serious issues with my RP3700. Here is what has happened -
I went to create a new master, and the machine reported a master mis-feed (A02-555, A01-222). Happens...