Tray 1 intermittently jams 0511..paper makes to the entrance of
bottom of fuser! Copy counter
16305
Sent from my SM-S918U using Tapatalk
Type: Posts; User: antone
Tray 1 intermittently jams 0511..paper makes to the entrance of
bottom of fuser! Copy counter
16305
Sent from my SM-S918U using Tapatalk
Replacement of exit unit....helped me
Sent from my SM-S918U using Tapatalk
4 machine's updating firmware 2 machines boots up 50 percent of the way black dot goes way.than goes into copy screen....I used 4 USB sticks. Used the top port and side port help
Sent from my...
HV PWA FIXED MIND
Sent from my SM-S918U using Tapatalk
Booting up keeping saying warming up...never comes ready.
Diagnostic Fuser gets hot!!
Help
Sent from my SM-S918U using Tapatalk
Replacement CPU
Sent from my SM-S918U using Tapatalk
K toner cartridge...doesn't get recognized! I PUT same cartridge in another machine and it works fine.IU unit is fine contact's are good ect
Sent from my SM-N981U using Tapatalk
Tray 1 fine tray 2 and Tray 3 LCT jams J2002 firmware updated, feed rollers replaced,transport unit replaced!! Help
Sent from my SM-N981U using Tapatalk
System 2 return off Clean Unit ...
De install...System boots reboot!
Sent from my SM-N981U using Tapatalk
Bizhub 658e tray 1,2,3 tray 1 feeds paper no problem! Tray 2,3 feeds one or 2 sheets and jams.Jam code 2004
Firmware updated
Replacement of 2,3 feed unit
Paper stops just before registration...
Konica Minolta and Savin good Benifits good company
Sent from my SM-N981U using Tapatalk
Can you send some information on this job
Sent from my SM-N981U using Tapatalk
Bizhub 808 jams tray 3 only J2002 paper gets registration area! All other trays run fine
Sent from my SM-N981U using Tapatalk
The Media has been around for ever ,just more of it! Trump is a big mouth nut,why people rally behind him is troubleing.That's
Why most of the people around him is in jail.
Sent from my...
Think the fuser drive is bad
Sent from my SM-N981U using Tapatalk
Fuser drive....must be a tough 2 replace ( ^^) cat
Sent from my SM-N981U using Tapatalk
Jam code 3003 ...1 or 2 copies out jams and folds entering fuser ! Replaced fuser ect
Sent from my SM-N981U using Tapatalk
Thanks customer had one wrong cartridge....K black unreal
Sent from my SM-N981U using Tapatalk
Trouble code replace toner cartridges! All contacts good...sometimes works for hour or 2 than back to install toner cartridge and close door .Really driving me nuts.
Sent from my SM-N981U using...
TROUBLE CODE C6751...REPLACEMENT of scanner unit also MFP....boots up and still TROUBLE with same code! Also fuser warms up ...but control panel says warming up. List prints o%%%
Sent from my...
Lol this is not paper behind the tray......tray 2 and bypass doesn't work!
Sent from my SM-N981U using Tapatalk
C458. TROUBLE CODE C0211...what assembly or parts are needed for this fix
Sent from my SM-N981U using Tapatalk
0Vvvvvvvvvvvvvg
Sent from my SM-N981U using Tapatalk
What clutch and what registration sensor??
Sent from my SM-N981U using Tapatalk
C 3102 not J 3102 ...fuser Lever under M30 no getting being pushed in from vertical transfer door!
Sent from my SM-N981U using Tapatalk