Thanks for reply, however the IC605 is not a fiery, it is a KM controller.
but I got it sorted , browse to ip and add :30083 to end of ip address.
There is also a little configuring to be done...
Type: Posts; User: jrf
Thanks for reply, however the IC605 is not a fiery, it is a KM controller.
but I got it sorted , browse to ip and add :30083 to end of ip address.
There is also a little configuring to be done...
Hi
We have just set up a C3070L with an KM IC605
Job Centro is not able to find any printer.
We get an error 503 Service unavailable if we try and browse to it.
Firmware is up to latest.
Any...
We had a similar issue with a C368.
It was a bad connection on the black toner supply unit, it's located at the front of the machine under the output tray.
Good luck
Very clever, could you please explain exactly what you do.
Thanks
Thanks for reply.
We changed the cables 4 days ago and no code since.
Hi
Has anyone found a solution for code C-9401 on the C3350 model without replacing the complete scanner unit.
the fault is probably due to the lamp or ccd but these are not available separately.
...
You can download it from infohub
Try a small network switch between the machine and their network. This has got me out of trouble more then once
Thanks Wyseller, unfortunately this one does not support Mifare
Hi
Does anybody know which KM card reader replicates the AU-201 as this is no longer going to be supplied by KM?
Thanks
It's usually the metal plate under the feed tyre which has moved position, also check the mylar attached to the plate.
We started again and fitted a second mfp board which has resolved the problem.
Thanks again for replies
We have had one do this, you may need to remove the drive unit of the punch unit and check if some welding which supports the solenoid has cracked.
Hello
I am getting a scanner lock error on a C35.
I have replaced the complete scanner assembly, the mfp board and the printer driver board and updated the firmware but no luck.
Have any of you...
Had this problem on a few of these.
Try setting original size and tray size the same in printing preference on the driver. this has worked for us.
Yes it works
Has anyone had trouble loading K2 firmware to c224e?
Probably a faulty flash card
First thing to do is check Jam code in the counter list
Unfortunately it has to be from one tray source due to custom software but thanks for reply
Hi
Has anybody a solution for printing large volumes of A5 size paper on a Bizhub 223 or Bizhub 454e type machine.
The LCT trays on these machines only take A4.
Thank you
Thanks Alan,
I should have spotted that earlier. All sorted now.
Thanks again
Hi
Code d0271 is due in this case to a failed memory module where the I option was installed.
Does anybody know how to deactivate the I Option.
Thank you
Thanks for this info seniortech,
It certainly helped
Hello all
We are getting a 2804 code
I have replaced the black dev unit, hv1 and 2 and IDC sensors and charge corona.
Test print for black is very weak or totally blank.
Colour registration...