Search:

because the machine on which it was used was a xerox dc100 then purchased by xeikon

does anyone know xeikon? I've had a lot of V2 toners... do you know which xerox toner it corresponds to?

Docucolor 100... from the same series as the docucolor 70

What type of toner does the docucolor 100 use? EA... EA HG?

and there is no problem with the toner fusing or sticking?

Is it possible to insert Versant 80 toner inside the 770? has anyone tried? can it cause problems over time?

I'm not very handy with testers and voltages, do you think there might be a piece I need to change? I have a couple of printers still that I get the pieces from.

I changed 3 developer unit, but after a few copies the machine gives me error 093-316, is it possible or is there some problem somewhere else? turning them by hand it seems to me that they turn,...

the problem wasnrelated to the software, updated everything was resolved, thank you all because you are always courteous and competent.

the finisher is sfn-4

I really wanted to reload the software to do the machine alignment, because it sees the big finisher when it's actually the short one. So it doesn't pin me and it doesn't bend me.

Hello Adrian, I have the pws but it can't be loaded also from the browser? in the machine update section?

I didn't know about this site, but it seems for technicians, anyone who could put the software available for download somewhere?

The 700 firmware is no longer on the xerox website, does anyone know where to download it? I've read that it would also be possible to put the 700i software, is that true?

I have 2 550 and 2 700 at work... and I have an epson at home that does nothing but give me problems, suggest a small xerox home laser printer, maybe I can put the same toner I use at work. thank you.

I have a 700i with finisher that is recognized by the rip, it is seen by the printer, it worked for a while but now it no longer clamps, it does not use the large output, neither in printing nor in...

I have to configure a 250 with a windows 10 (never done), I downloaded the installers but I can't create the print queue ... the fiery sees the printer but the pc doesn't want to print ... does...

Is the finisher for the xerox 4110 compatible with the xerox 700? What is the finisher code for the 700?

Who bought an iprog? I have 2 700i, 2 550 and the chips have become a problem. Does anyone have it? where to buy it?

Fixed, the cable was damaged (the plug), replaced and printer match, thanks to all

FIERY E100-05 rip, the barcode begin with "BP..."

I bought a 700i with FIERY E100-05 rip, the printer responds well but when I try to print from rip it gives me error 127-212, looking online it says to clean the contacts well, I have disassembled...

Thanks to everyone for the exhaustive explanations, to date I tell you that on the 550 I put the development group of a toilet 7755 + toner of the 700 and I had no problems whatsoever. when I find a...

ok, obviously the chips work for the printer they were created for, what I mean is because once used they cannot be passed on to another identical printer.

Do you know how chips work? How does the printer recognize them? Why can't I transfer chips from one printer to another?