hello Kyaw Thu Ko
Had this same problem 2 years ago when I bought my first ir 8105 you need a OEM upper fuser to work properly, compatible upper fuser will not work, what i did is buy used...
Type: Posts; User: Kinesis510
hello Kyaw Thu Ko
Had this same problem 2 years ago when I bought my first ir 8105 you need a OEM upper fuser to work properly, compatible upper fuser will not work, what i did is buy used...
Hello sir, fix my problem
First did change the Upper Fuser Roller with generic brand replacement - same problem
Then change to a original Canon upper fuser roller - it working fine again
...
Hello Sirs,
I need help. Had to reset to default the SDS setting. Now having problems setting the roller unit configuration ( +4, 0, -1 ). Can't access pass level 0 (+4) .
Thanks for the help
Thank you sirs for replying and helping, will try tomorrow and I'll get back to you sirs.
Hello Sirs,
When photocopying 1000pcs LTR size 70 grams paper single side on cassette 1 the copier will slow down a few times, around 200 plus copies then regain speed. After...
Change everything as you suggested sirs, its working fine now.
Many Thanks
I got it sir, will do it tomorrow.
thanks
Hello Sirs,
I need help having problems with a Ir5000 unit when using Legal Size paper on duplex mode paper comes out tears on the edges. Leaving parts of the paper tears edges inside the...
Hello
I need help on ricoh aficio 700 copier, the problem is paper gets jam between the feed roller, separation roller and transport roller I have already replace them but still the same problem...
Thanks for the advice I will try it tomorrow
Thanks again
I got a problem with a aficio 700, the customer was complaining it using to much toner it's average copy was 35,000 to 40,000 per bottle, now its doing only 20,000 to 25,000. I have check all the...
No, I'll try it tomorrow Thanks for the info
thanks a lot
Hi, If anyone can help
Need Help on Aficio 700 very poor image quality, have already
change parts connecting to poor quality, No errors, Change dv unit & drum unit, hit on a dead end. The...