Search:

Type: Posts; User: giddyupngo

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. [Misc] Re: Recommendation for low volume mfp? 1,200 copies per month

    Thanks blackcat,
    I looked through the brother and Lexmark offerings. The only one I found that can print on 216gsm ledger paper is this one. Lexmark CX730deMy current copiers recommended duty cycle...
  2. [Misc] Recommendation for low volume mfp? 1,200 copies per month

    Hi, I am looking for advice on a copier to use in an office that runs 1,200 copies/prints per month. Right now using a Kyocera Ecosys M4125idn. It is 4.5 years old, total counter is 63K. Katun...
  3. Replies
    3
    Views
    1,781

    Re: C364 Skewed Images Issue

    There may be vertical transport rollers that are worn down enough that the paper can skew. You could try wrapping them with electrical tape to see if it makes a difference. Also make sure all the...
  4. Replies
    14
    Views
    5,350

    [Dead] Re: BizHub C250 won't print, led data blinking

    Sometimes if you login to the copier through a browser, there is a direct print option where you can send a *.txt file directly to the copier bypassing any drivers. In know there is one on the...
  5. Replies
    0
    Views
    662

    [Misc] C368 Waste Toner box not installed

    We just unboxed a new C368, and on startup it says "Waste Toner Box not installed". I tricked the front door, and when I hold in the Waste Toner Box with my hand, it registers, but when I let go it...
  6. Re: Konica Minolta Bizhub C35 error code 0094 and cant close right side door

    I have seen a couple reasons for the 0094 code. Most popular reason was a sticky 2nd transfer release solenoid sound dampening pad. The small foam pad gets sticky, and keeps the solenoid back from...
  7. [Misc] Re: Bizhub 25 colored lines/background when scanning (with samples)

    No resolution to this, but thank you for everyone who responded.
  8. [Misc] Re: Bizhub 25 colored lines/background when scanning (with samples)

    Thanks everyone. The lines are not there anymore, just a light blue background. I did clean the glass personally, and I don't think dirty glass could cause a light blue background covering nearly the...
  9. [Misc] Re: Bizhub 25 colored lines/background when scanning (with samples)

    bsm2,
    Thanks for the reply, another technician started this call, so I am assuming he would have tried this, but I am not personally familiar with any user calibrations in this machine. I may have...
  10. [Misc] Bizhub 25 colored lines/background when scanning (with samples)

    Hi everyone, hoping for some help here. Print quality and scans in black and white are fine. When scanning in color I was getting random colored lines in a subscan direction, see sample. I...
  11. Re: Bypass Non-Genuine Toner message for M2535dn?

    Thanks everyone, I was pretty sure there was no way to bypass it. It isn't my call to decide on OEM vs. generic toner. I just have to play with the cards I'm dealt. Have a great weekend.
  12. Re: Kyocera Taskalfa 4002i gives out light prints.

    Just an update, the high voltage board didn't help. Customer was using a Microsoft print driver, so we are looking into drivers as the cause.
  13. Bypass Non-Genuine Toner message for M2535dn?

    Hi, we have a customer using 3rd party toner, every time they turn on the machine they have to hold down stop and ok for 3 seconds to clear the message. Is there any way to turn off this message...
  14. Need separation pad part number for C430DN bypass

    Hi, not very familiar with this model, very frustrated by the parts manual. I know the bypass pickup tire is GF031007, but it is double feeding, and I can't find the light yellow separation pad that...
  15. Re: Kyocera Taskalfa 4002i gives out light prints.

    Thank you, I replaced the developer ultimately, because the toner sensor output value was -21, it wad stating "toner empty", and there was plenty of toner. The new developer brought the toner sensor...
  16. Re: Kyocera Taskalfa 4002i gives out light prints.

    Dealing with the same thing, 4002i giving out light prints, different densities on internal prints within one hour. I did a forced toner add in U132 and it says the toner is empty, though it isn't. ...
  17. Replies
    25
    Views
    6,144

    [CQ] Re: C454e Background problem

    Swap the transfer roller, I know it seems crazy, but I have had transfer rollers cause ghosting on the print side. My only logical explanation is that the toner is not being pulled onto the paper...
  18. Replies
    15
    Views
    12,239

    [Misc] Re: Bizhub C358 missing 'Device Comsumables' tab

    I'm looking for the one under utility/counter with the little bars representing life remaining, accessible on the operation panel.
  19. Replies
    15
    Views
    12,239

    [Misc] Re: Bizhub C358 missing 'Device Comsumables' tab

    Thanks for this information. I would like to have the button "consumable life" because I like to look at the gas gauges during problem diagnosis. However I don't want a warning on the screen (but...
  20. Replies
    3
    Views
    4,944

    Re: Konica Lifespan

    I would say 2 million on these machines is similar to 150K on a car. You can still drive it for a long time, but you are going to be paying the mechanic a lot more, and in the case of copiers they...
  21. Thread: B227 c9401

    by giddyupngo
    Replies
    2
    Views
    1,778

    Re: B227 c9401

    Did you try cleaning the white reference or slit glass?

    Sent from my SAMSUNG-SM-G930A using Tapatalk
  22. Replies
    10
    Views
    23,417

    Re: FS-1128 displays 'replace process unit'

    I just had one of these today with the message "replace process unit". It just means the U251 Maintenance count has broken 100K. I just reset the U251 counter to zero, and the message disappears. ...
  23. Replies
    1
    Views
    671

    SOLVED: The Secret Base Door

    Recently we had a 364e with a broken base door. This is a swing open base that does not feed paper, it is just for storage. We thought it was a DK-510 base, as this is the only listed storage base. ...
  24. Replies
    0
    Views
    792

    SOLVED: colored line from ADF C3351

    I was getting a yellow line when I copied an original through the DP/ADF, but nothing when copying in B/W thru ADF, and nothing from glass.

    I ended up taking it apart, and finding black ink marks...
  25. Replies
    4
    Views
    1,199

    Re: CAC Print Driver for Konica Minolta 361?

    There is information in Konica Minolta bulletin 10908, just released.

    Sent from my SAMSUNG-SM-G930A using Tapatalk
Results 1 to 25 of 109
Page 1 of 5 1 2 3 4